Ponències/Comunicacions de congressos

Recent Submissions

  • Re-design of a component of a lower-limb robotic exoskeleton for integrating sensing capacity and enhancing multi-material direct additive manufacturing 

    Minguella Canela, Joaquim; Challa, Pritam Reddy; Santos López, M. Antonia de los; Lobo Prat, Joan; Font Llagunes, Josep Maria (2021)
    Conference report
    Restricted access - publisher's policy
    Exoskeletons are high value-added products, usually manufactured in small series and often required to be adapted to the user. The user comfort is required to be maximum, whilst several sensing and actuating elements must ...

  • Effect of land cover and climate changes on rainfall-induced landslides: regional-scale modelling in the Val d’Aran (Pyrenees, Spain) 

    Hurlimann Ziegler, Marcel; Medina Iglesias, Vicente César de; Lloret Morancho, Antonio; Vaunat, Jean; Puig i Polo, Càrol; Moya Sánchez, José (International Society for Soil Mechanics and Geotechnical Engineering (ISSMGE), 2021)
    Conference report
    Open Access
    The analysis of the impacts of future environmental changes on rainfall-induced landslides is of great importance. Recent studies have shown that these changes will affect the frequency and magnitude of shallow slides and ...

  • Hybrid gas-electrical power & heavy duty propulsion: test platform 

    Bosch Tous, Ricardo; Casals Torrens, Pau; Álvarez Flórez, Jesús Andrés; Serrano Fontova, Alexandre (2018)
    Conference lecture
    Open Access
    This paper presents the results and discussion of an extensive set of tests of a hybrid generation system (gas-electric), to feed the electric motors which propel a small or medium vessel. Primarily, the hybrid electric ...

  • Design of a test bench for measuring friction force in a piston-cylinder system 

    Buj Corral, Irene; Zayas Figueras, Enrique Ernesto; Álvarez Flórez, Jesús Andrés; Gutiérrez González, Ernesto (2016)
    Conference report
    Open Access
    In the present work, design of a first approach of a test bench prototype for measuring friction in a piston-cylinder system is presented. The bench consists of a motor, belt and pulley transmission, crank mechanism, a ...

  • Analysis of roughness, force and vibration signals in ball-end milling processes 

    Álvarez Flórez, Jesús Andrés; Buj Corral, Irene; Vivancos Calvet, Joan (2015)
    Conference report
    Open Access
    In the present paper, roughness, force and vibration signals from ball-end milling processes are analysed. From the roughness signal actual feed value was obtained as expected. From the force and vibration signals both the ...

  • Protocolo para un sistema de gestión interna de la calidad de asignaturas en los títulos de grado 

    Cadenato Matia, Ana María; Salla Tarragó, José María; Ramis Juan, Xavier; Morancho Llena, José María; Montserrat Jordà, José; Martín Godoy, José Luis (Servicio de publicaciones de la UPV, 2011)
    Conference lecture
    Restricted access - publisher's policy
    En este trabajo, se desarrolla un protocolo para establecer un Sistema de Gestión Interna de la Calidad (SGIC) de asignaturas de la titulación de Grado en Ingeniería en Tecnologías Industriales dentro del proceso de ...

  • Tècniques i mètodes d'avaluació a la UPC. Incidència en els processos 

    Corral Manuel de Villena, Ignacio de; Armengol Cebrian, Jesús; Ruiz Mansilla, Rafael; Batet Miracle, Lluís; García-Almiñana, Daniel; Sánchez Robert, Francesc Josep; Pretel Sánchez, Carme; Martínez Martínez, María del Rosario; Cadenato Matia, Ana María; Amante García, Beatriz; Domingo Peña, Joan; Gallego Fernández, María Isabel; Gorchs Altarriba, Roser; García Carrillo, Àgueda; Jordana Barnils, José (2010)
    Conference report
    Open Access
    En el presente proyecto, en primer lugar se ha estructurado y organizado el contenido del espacio virtual propio del Grupo de evaluación, GRAPA, dentro de la plataforma RIMA. Dicho entorno incluye desde aportaciones ...