Determination of the thermal parameters of a clay from heating cell tests
Visualitza/Obre
13188428.pdf (541,4Kb) (Accés restringit)
Sol·licita una còpia a l'autor
Què és aquest botó?
Aquest botó permet demanar una còpia d'un document restringit a l'autor. Es mostra quan:
- Disposem del correu electrònic de l'autor
- El document té una mida inferior a 20 Mb
- Es tracta d'un document d'accés restringit per decisió de l'autor o d'un document d'accés restringit per política de l'editorial
Estadístiques de LA Referencia / Recolecta
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/21901
Tipus de documentText en actes de congrés
Data publicació2013
Condicions d'accésAccés restringit per política de l'editorial
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
Boom Clay is being studied in Belgium in connection with the design of a repository for radioactive waste. Within this context, thermal impact may play an important role on the behaviour of this low-permeability clay. To evaluate this impact, heating pulse tests on intact borehole samples were carried out using an axi-symmetric and constant volume heating cell with controlled hydraulic boundary conditions. Attention is focused on the time evolution of temperature and pore water pressure changes along heating and cooling paths –i.e., pore pressure build-up during quasi-undrained heating and later dissipation to the applied hydraulic boundary conditions–. A coupled thermo-hydro-mechanical finite element program was used in a first stage to determine thermal parameters by back-analysis and then to simulate the experimental results.
CitacióRomero, E. [et al.]. Determination of the thermal parameters of a clay from heating cell tests. A: International Conference on Soil Mechanics and Geotechnical Engineering. "Proceedings of the 18th International Conference on Soil Mechanics and Geotechnical Engineering". Paris: 2013, p. 3403-3406.
Versió de l'editorhttp://www.geotech-fr.org/sites/default/files/congres/cimsg/3403.pdf
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
13188428.pdf | 541,4Kb | Accés restringit |