Articles de revista: Enviaments recents
Ara es mostren els items 25-36 de 259
-
Effect of the microstructure generated by repetitive corrugation and straightening (RCS) process on the mechanical properties and stress corrosion cracking of Al-7075 alloy
(Elsevier, 2021-11)
Article
Accés obertThis study discussed the effect of the heterogeneous microstructure generated through the Repetitive Corrugation and Straightening (RCS) process on the mechanical and stress corrosion cracking behavior of the AA7075. As a ... -
Study on the formability and texture evolution of AA6061 alloy processed by repetitive corrugation and straightening
(2021-10-28)
Article
Accés obertThe enhanced mechanical properties obtained by refining the grain size down to the ultrafine-grained (UFG) regime have attracted considerable attention in recent years. The severe plastic deformation (SPD) techniques allow ... -
Deformation kinetics of a TRIP steel determined by in situ high-energy synchrotron X-ray diffraction
(2021-12-09)
Article
Accés obertThe microstructure design and the development of predictive approaches exploiting the transformation-induced plasticity (TRIP) effect require a keen understanding of the kinetics governing the strain-induced martensitic ... -
Characterization of microstructure and texture of binary Mg-Ce alloy processed by equal channel angular pressing
(2021-11-01)
Article
Accés obertThe characterization of microstructure and texture development of binary Mg-0.3Ce (wt%) after equal-channel angular pressing (ECAP) processing via route Bc at 300 and 350 °C through 4 passes were investigated using electron ... -
Viscoelastic characterization of parasagittal bridging veins and implications for traumatic brain injury: a pilot study
(2021-10-18)
Article
Accés obertMany previous studies on the mechanical properties of Parasagittal Bridging Veins (PSBVs) found that strain rate had a significant effect on some mechanical properties, but did not extensively study the viscoelastic effects, ... -
Effect of loading mode on the microstructural heterogeneity of ultra-fine-grained iron
(2021-12-01)
Article
Accés obertThis manuscript analyzes the microstructural changes introduced by both monotonic tensile and cyclic loads in ultrafine-grained Armco iron obtained after severe plastic deformation by equal channel angular pressing. The ... -
Investigation of ball burnishing process using vibration and acoustic emission sensors
(Institute of Physics (IOP), 2021-10-01)
Article
Accés obertIn this paper, a ball burnishing tool mounted in a CNC lathe is characterized. This tool may work as vibration assisted ball-burnishing tool and in conventional way. The characterization consists of acoustic emission ... -
A predictive model for fracture in human ribs based on in-vitro acoustic emission data
(2021-09-01)
Article
Accés obertPurpose The aim of this paper is to propose a fracture model for human ribs based on acoustic emission (AE) data. The accumulation of microcracking until a macroscopic crack is produced can be monitored by AE. The ... -
Mechanical behavior of blood vessels: elastic and viscoelastic contributions
(2021-08-26)
Article
Accés obertThe mechanical properties of the cerebral bridging veins (CBVs) were studied using advanced microtensile equipment. Detailed high-quality curves were obtained at different strain rates, showing a clearly nonlinear stress–strain ... -
Ultrasonic vibration-assisted ball burnishing tool for a lathe characterized by acoustic emission and vibratory measurements
(Multidisciplinary Digital Publishing Institute (MDPI), 2021-10-01)
Article
Accés obertThis paper focuses on a resonant system used to induce a low-amplitude movement and ultrasonic frequency to complement a ball burnishing process on a lathe. The system was characterized through the combination of different ... -
Improvement of phosphate adsorption kinetics onto ferric hydroxide by size reduction
(2021-05-31)
Article
Accés obertBall milling and ultra-sonication size reduction procedures were applied to granular ferric hydroxide (GFH) to obtain two micro-sized adsorbents. These two adsorbents and GFH were investigated to improve the removal of ... -
Heat treatment design for a QP steel: effect of partitioning temperature
(Multidisciplinary Digital Publishing Institute (MDPI), 2021-07-19)
Article
Accés obertDesigning a new family of advanced high-strength steels (AHSSs) to develop automotive parts that cover early industry needs is the aim of many investigations. One of the candidates in the 3rd family of AHSS are the quenching ...