Mostra el registre d'ítem simple

dc.contributor.authorMorales, Rosa Amalia
dc.contributor.authorCandal Pazos, Maria Virginia
dc.contributor.authorSantana Pérez, Orlando Onofre
dc.contributor.authorGordillo Aubert, Antonio
dc.contributor.authorSalazar, Rubén
dc.contributor.otherUniversitat Politècnica de Catalunya. Departament de Ciència dels Materials i Enginyeria Metal·lúrgica
dc.date.accessioned2014-01-17T11:34:36Z
dc.date.available2014-01-17T11:34:36Z
dc.date.created2014-01
dc.date.issued2014-01
dc.identifier.citationMorales, R. [et al.]. Effect of the thermoforming process variables on the sheet friction coefficient. "Materials and design", Gener 2014, vol. 53, p. 1097-1103.
dc.identifier.issn0261-3069
dc.identifier.urihttp://hdl.handle.net/2117/21261
dc.description.abstractThe objective of this work was to obtain, through a simple experimental assembly, the real influence of the friction and process conditions in the assisted thermoforming process. The use of simulation tools to optimize this process requires the knowledge of the sheet-plug system friction coefficient [μ], the used temperature and velocity conditions, and due to that, the software does not have a wide database. For this, the users suppose μ with the previous known difference between the simulated and the experimental data. For this reason, the obtaining of μ may allow to achieve more accurate simulations. In this work, a modified pendulous impact in Izod geometry was used to the measurements. The μ increased with the sheet temperature. On the other hand, it was not possible to detect a significant μ variations regarded with the plug material
dc.format.extent7 p.
dc.language.isoeng
dc.rightsAttribution-NonCommercial-NoDerivs 3.0 Spain
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/3.0/es/
dc.subjectÀrees temàtiques de la UPC::Enginyeria dels materials
dc.subject.lcshPolypropylene
dc.subject.lcshThermoforming
dc.subject.otherFriction coefficient
dc.subject.otherMaterial testing
dc.subject.otherPolypropylene
dc.subject.otherThermoforming
dc.titleEffect of the thermoforming process variables on the sheet friction coefficient
dc.typeArticle
dc.subject.lemacTermoplàstics
dc.subject.lemacPolipropilè
dc.contributor.groupUniversitat Politècnica de Catalunya. POLYCOM - Polimers i compòsits: tecnologia
dc.identifier.doi10.1016/j.matdes.2013.08.009
dc.relation.publisherversionhttp://www.sciencedirect.com/science/article/pii/S0261306913007528
dc.rights.accessOpen Access
local.identifier.drac12984233
dc.description.versionPostprint (published version)
local.citation.authorMorales, R.; Candal, M.; Santana, O.; Gordillo, A.; Salazar, R.
local.citation.publicationNameMaterials and design
local.citation.volume53
local.citation.startingPage1097
local.citation.endingPage1103


Fitxers d'aquest items

Thumbnail

Aquest ítem apareix a les col·leccions següents

Mostra el registre d'ítem simple