Control of a utility connected microgrid
Visualitza/Obre
10.1109/ISGTEUROPE.2010.5639004
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/20980
Tipus de documentComunicació de congrés
Data publicació2010
EditorInstitute of Electrical and Electronics Engineers (IEEE)
Condicions d'accésAccés obert
Llevat que s'hi indiqui el contrari, els
continguts d'aquesta obra estan subjectes a la llicència de Creative Commons
:
Reconeixement-NoComercial-SenseObraDerivada 3.0 Espanya
Abstract
This paper describes the control algorithm of a utility connected microgrid, based on independent control of active and reactive power (PQ control) and working in centralized
operation mode. The microgrid under investigation is composed of three configurable units: a generation unit, a storage unit and a load. These units are interfaced with the microgrid through a
Voltage Source Converter (VSC) and are controlled by the nodes of the communication system by means of IEC 61850. A set of
tests have been conducted to evaluate the microgrid behavior.
CitacióColet, A. [et al.]. Control of a utility connected microgrid. A: IEEE Innovative Smart Grid Technologies Conference Europe. "Conference Proceedings Innovative Smart Grid Technologies Conference Europe (ISGT Europe), 2010". Gothenburg: Institute of Electrical and Electronics Engineers (IEEE), 2010, p. 1-7.
ISBN978-1-4244-8509-3
Versió de l'editorhttp://ieeexplore.ieee.org/xpls/abs_all.jsp?arnumber=5639004&tag=1
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
05639004.pdf | 4,638Mb | Visualitza/Obre |