Embedded system with RFID technology and inductive proximity sensor
Vojtech et al.pdf (749,8Kb) (Restricted access) Request copy
Què és aquest botó?
Aquest botó permet demanar una còpia d'un document restringit a l'autor. Es mostra quan:
- Disposem del correu electrònic de l'autor
- El document té una mida inferior a 20 Mb
- Es tracta d'un document d'accés restringit per decisió de l'autor o d'un document d'accés restringit per política de l'editorial
Document typeConference report
PublisherInstitute of Electrical and Electronics Engineers (IEEE)
Rights accessRestricted access - publisher's policy
Monitoring of technology processes is crucial for quality management and also for effectiveness of following logistics chain to achieve customer expectations and requirements. The control of upheavals of moulding presses often fails in using manual records. It is crucial mainly for owner's moulds. The improvement is solved by RFID technology and read-write tags. This paper focuses on full description of the system which controls the number of upheavals of the moulding press. It is not based on direct recording into tags, but on clientserver application. It uses web based interface with access by mobile phone. The evaluation in real operation confirms improvement in controlling of moulds operation.
CitationVojtech, L. [et al.]. Embedded system with RFID technology and inductive proximity sensor. A: International Conference on Telecommunications and Signal Processing. "Proceedings of the 36th International Conference on Telecommunications and Signal Processing". Roma: Institute of Electrical and Electronics Engineers (IEEE), 2013, p. 213-217.
|Vojtech et al.pdf||749,8Kb||Restricted access|