Show simple item record

dc.contributor.authorCasini, Francesca
dc.contributor.authorViggiani, Giulia M.B.
dc.contributor.authorSpringman, Sarah Marcella
dc.contributor.otherUniversitat Politècnica de Catalunya. Departament d'Enginyeria del Terreny, Cartogràfica i Geofísica
dc.date.accessioned2013-11-18T15:02:42Z
dc.date.created2013-10
dc.date.issued2013-10
dc.identifier.citationCasini, F.; Viggiani, G.M.B.; Springman, S. Breakage of an artificial crushable material under loading. "Granular matter", Octubre 2013, vol. 15, núm. 5, p. 661-673.
dc.identifier.issn1434-5021
dc.identifier.urihttp://hdl.handle.net/2117/20648
dc.description.abstractThe mechanical behaviour of granular materials depends on their grading. Crushing of particles under compression or shear modifies the grain size distribution, with a tendency for the percentage of fine material to increase. It follows that the frictional properties of the material and the critical states are modified as a consequence of the changes in grain size distribution and the available range of packing densities. This paper illustrates an extended experimental investigation of the evolution of the grading of an artificial granular material, consisting of crushed expanded clay pellets under different loading conditions. The changes of grading of the material after isotropic, one-dimensional and constant mean effective stress triaxial compression were described using a single parameter based on the ratio of the areas under the current and an ultimate cumulative particle size distribution, which were both assumed to be consistent with self similar grading with varying fractal dimension. Relative breakage was related to the total work input for unit of volume. For poorly graded samples, the observed maximum rate of breakage is practically independent of initial uniformity. Further experiments at higher confining stress are required to investigate the mechanics of breakage of better graded samples.
dc.format.extent13 p.
dc.language.isoeng
dc.subjectÀrees temàtiques de la UPC::Enginyeria dels materials
dc.subject.lcshGranular materials
dc.subject.otherFractals
dc.subject.otherGrain crushing
dc.subject.otherGrain size distribution
dc.subject.otherGranular material
dc.titleBreakage of an artificial crushable material under loading
dc.typeArticle
dc.subject.lemacMaterials granulars
dc.identifier.doi10.1007/s10035-013-0432-x
dc.description.peerreviewedPeer Reviewed
dc.relation.publisherversionhttp://link.springer.com/article/10.1007%2Fs10035-013-0432-x
dc.rights.accessRestricted access - publisher's policy
local.identifier.drac12859081
dc.description.versionPostprint (published version)
dc.date.lift10000-01-01
local.citation.authorCasini, F.; Viggiani, G.M.B.; Springman, S.
local.citation.publicationNameGranular matter
local.citation.volume15
local.citation.number5
local.citation.startingPage661
local.citation.endingPage673


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record

All rights reserved. This work is protected by the corresponding intellectual and industrial property rights. Without prejudice to any existing legal exemptions, reproduction, distribution, public communication or transformation of this work are prohibited without permission of the copyright holder