Motion planning for 6D manipulation with aerial towed-cable systems
Tipus de documentText en actes de congrés
Condicions d'accésAccés obert
Projecte de la Comissió EuropeaARCAS - Aerial Robotics Cooperative Assembly System (EC-FP7-287617)
Performing aerial 6-dimensional manipulation using flying robots is a challenging problem, to which only little work has been devoted. This paper proposes a motion planning approach for the reliable 6-dimensional quasi-static manipulation with an aerial towed-cable system. The novelty of this approach lies in the use of a cost-based motion-planning algorithm together with some results deriving from the static analysis of cable-driven manipulators. Based on the so-called wrench-feasibility constraints applied to the cable tensions, as well as thrust constraints applied to the flying robots, we formally characterize the set of feasible configurations of the system. Besides, the expression of these constraints leads to a criterion to evaluate the quality of a configuration. This allows us to define a cost function over the configuration space, which we exploit to compute good-quality paths using the T-RRT algorithm. As part of our approach, we also propose an aerial towed-cable system that we name the FlyCrane. It consists of a platform attached to three flying robots using six fixed-length cables. We validate the proposed approach on two simulated 6-D quasi-static manipulation problems involving such a system, and show the benefit of taking the cost function into account for such motion planning tasks.
CitacióManubens, M. [et al.]. Motion planning for 6D manipulation with aerial towed-cable systems. A: Robotics: Science and Systems. "Proceedings of the IX Robotics: Science and Systems Conference (RSS)". Berlin: 2013.
Versió de l'editorhttp://www.roboticsproceedings.org/rss09/p28.html