Improvement in the definition of ODM for FSV
Zhang, Duffi et al.pdf (980,5Kb) (Restricted access) Request copy
Què és aquest botó?
Aquest botó permet demanar una còpia d'un document restringit a l'autor. Es mostra quan:
- Disposem del correu electrònic de l'autor
- El document té una mida inferior a 20 Mb
- Es tracta d'un document d'accés restringit per decisió de l'autor o d'un document d'accés restringit per política de l'editorial
Rights accessRestricted access - publisher's policy
All rights reserved. This work is protected by the corresponding intellectual and industrial property rights. Without prejudice to any existing legal exemptions, reproduction, distribution, public communication or transformation of this work are prohibited without permission of the copyright holder
It has been found that the feature-selective validation (FSV) method may demonstrate inconsistencies in the results when applied to the comparison of zero-crossing datasets. This type of data is typical of time-domain-based electromagnetic compatibility validation. This paper investigates the source of this inconsistency and proposes a solution. The reason was investigated using a set of typical transient data, which was related to the derivation of the formulas of FSV. It is demonstrated that the problem can be alleviated by enhancing the definition of the offset difference measure. The resulting enhanced performance of FSV is assessed by comparing the results with visual assessment. It is demonstrated that the improvement increases the agreement between FSV prediction and visual assessment. Meanwhile, this modification has a very limited effect on the comparison of other data structures which do not cross the axis.
CitationZhang, G. [et al.]. Improvement in the definition of ODM for FSV. "IEEE transactions on electromagnetic compatibility", 25 Desembre 2012, vol. 55, núm. 4, p. 773-779.
|Zhang, Duffi et al.pdf||980,5Kb||Restricted access|