Mostra el registre d'ítem simple
Analysis of the fault-tolerance capacity of the multilevel active-clamped converter
dc.contributor.author | Nicolás Apruzzese, Joan |
dc.contributor.author | Busquets Monge, Sergio |
dc.contributor.author | Bordonau Farrerons, José |
dc.contributor.author | Alepuz Menéndez, Salvador |
dc.contributor.author | Calle Prado, Alejandro |
dc.contributor.other | Universitat Politècnica de Catalunya. Departament d'Enginyeria Electrònica |
dc.contributor.other | Escola Tècnica Superior d'Enginyeria Industrial de Barcelona |
dc.date.accessioned | 2013-09-25T15:06:26Z |
dc.date.created | 2013 |
dc.date.issued | 2013 |
dc.identifier.citation | Nicolas, J. [et al.]. Analysis of the fault-tolerance capacity of the multilevel active-clamped converter. "IEEE transactions on industrial electronics", 2013, vol. 60, núm. 11, p. 4773-4783. |
dc.identifier.issn | 0278-0046 |
dc.identifier.uri | http://hdl.handle.net/2117/20210 |
dc.description.abstract | Thanks to the inherent redundancy to generate the different output voltage levels, the multilevel active-clamped (MAC) topology presents an important fault-tolerance ability which makes it interesting for several applications. This paper presents an analysis of the fault-tolerance capacity of the MAC converter. Both open-circuit and short-circuit faults are considered, and the analysis is carried out under single-device and two simultaneous device faults. Switching strategies and different hardware modifications to overcome the limitations caused by faults are proposed. Experimental tests with a four-level MAC prototype are presented to validate the analysis. |
dc.format.extent | 11 p. |
dc.language.iso | eng |
dc.publisher | Institute of Electrical and Electronics Engineers (IEEE) |
dc.subject | Àrees temàtiques de la UPC::Enginyeria electrònica |
dc.subject.lcsh | Power electronics. |
dc.subject.lcsh | Fault tolerance (Engineering) |
dc.subject.other | Active clamped |
dc.subject.other | Fault tolerance |
dc.subject.other | Multilevel topologies |
dc.subject.other | Power electronics |
dc.title | Analysis of the fault-tolerance capacity of the multilevel active-clamped converter |
dc.type | Article |
dc.subject.lemac | Electrònica de potència -- Aparells i accessoris |
dc.subject.lemac | Electrònica de potència |
dc.subject.lemac | Convertidors de corrent elèctric |
dc.contributor.group | Universitat Politècnica de Catalunya. GREP - Grup de Recerca en Electrònica de Potència |
dc.identifier.doi | 10.1109/TIE.2012.2222856 |
dc.rights.access | Restricted access - publisher's policy |
local.identifier.drac | 12673713 |
dc.description.version | Postprint (published version) |
dc.date.lift | 10000-01-01 |
local.citation.author | Nicolas, J.; Busquets-Monge, S.; Bordonau, J.; Alepuz, S.; Calle, A. |
local.citation.publicationName | IEEE transactions on industrial electronics |
local.citation.volume | 60 |
local.citation.number | 11 |
local.citation.startingPage | 4773 |
local.citation.endingPage | 4783 |
Fitxers d'aquest items
Aquest ítem apareix a les col·leccions següents
-
Articles de revista [1.728]
-
Articles de revista [32]