Show simple item record

dc.contributor.authorBorrell Sanz, Angel
dc.contributor.authorCastilla Fernández, Miguel
dc.contributor.authorMiret Tomàs, Jaume
dc.contributor.authorMatas Alcalá, José
dc.contributor.authorGarcía de Vicuña Muñoz de la Nava, José Luis
dc.contributor.otherUniversitat Politècnica de Catalunya. Departament d'Enginyeria Electrònica
dc.date.accessioned2013-07-19T09:03:37Z
dc.date.created2013-11
dc.date.issued2013-11
dc.identifier.citationBorrell, A. [et al.]. Control design for multiphase synchronous buck converters based on exact constant resistive output impedance. "IEEE transactions on industrial electronics", Novembre 2013, vol. 60, núm. 11, p. 4920-4929.
dc.identifier.issn0278-0046
dc.identifier.urihttp://hdl.handle.net/2117/19978
dc.description.abstractThis paper describes a control design methodology based on output impedance analysis for multiphase synchronous buck converters. This design leads to an optimal output voltage transient response. Two design alternatives are proposed. The first alternative uses an equivalent single-phase converter to design the control parameters. This approximation is valid as long as the deviations between the phases of the converter are within the usual tolerance limits. The second one achieves exact constant resistive output impedance regardless of the differences that exist between the phases. Simulation and experimental results are reported in order to validate the two design approaches.
dc.format.extent10 p.
dc.language.isoeng
dc.publisherInstitute of Electrical and Electronics Engineers (IEEE)
dc.subjectÀrees temàtiques de la UPC::Enginyeria electrònica::Electrònica de potència::Convertidors de corrent elèctric
dc.subjectÀrees temàtiques de la UPC::Enginyeria electrònica::Electrònica de potència::Rectificadors de corrent elèctric
dc.subjectÀrees temàtiques de la UPC::Enginyeria electrònica::Electrònica de potència::Sistemes d'alimentació
dc.subject.lcshElectric current regulators--Design and construction
dc.subject.lcshHysteresis--Mathematical models
dc.subject.lcshVoltage regulators
dc.subject.lcshElectric current converters
dc.subject.lcshRotary converters
dc.subject.otherComputer power supplies
dc.subject.otherDesign methodology
dc.subject.otherMultiphase hysteretic control
dc.subject.otherVoltage regulator
dc.titleControl design for multiphase synchronous buck converters based on exact constant resistive output impedance
dc.typeArticle
dc.subject.lemacElectrònica de potència
dc.subject.lemacSistemes elèctrics de potència -- Control
dc.subject.lemacConvertidors de corrent elèctric
dc.subject.lemacReguladors elèctrics
dc.subject.lemacHistèresi
dc.subject.lemacImpedància (Electricitat)
dc.contributor.groupUniversitat Politècnica de Catalunya. SEPIC - Sistemes Electrònics de Potència i de Control
dc.identifier.doi10.1109/TIE.2012.2221115
dc.relation.publisherversionhttp://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=6316145
dc.rights.accessRestricted access - publisher's policy
local.identifier.drac12668557
dc.description.versionPostprint (published version)
dc.date.lift10000-01-01
local.citation.authorBorrell, A.; Castilla, M.; Miret, J.; Matas, J.; Garcia de Vicuña, J.
local.citation.publicationNameIEEE transactions on industrial electronics
local.citation.volume60
local.citation.number11
local.citation.startingPage4920
local.citation.endingPage4929


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record

All rights reserved. This work is protected by the corresponding intellectual and industrial property rights. Without prejudice to any existing legal exemptions, reproduction, distribution, public communication or transformation of this work are prohibited without permission of the copyright holder