Mostra el registre d'ítem simple

dc.contributor.authorCamacho Santiago, Antonio
dc.contributor.authorCastilla Fernández, Miguel
dc.contributor.authorMiret Tomàs, Jaume
dc.contributor.authorVasquez, Juan C.
dc.contributor.authorAlarcón Gallo, Eduardo
dc.contributor.otherUniversitat Politècnica de Catalunya. Departament d'Enginyeria Electrònica
dc.date.accessioned2013-06-27T13:32:00Z
dc.date.created2013-04
dc.date.issued2013-04
dc.identifier.citationCamacho, A. [et al.]. Flexible voltage support control for three-phase distributed generation inverters under grid fault. "IEEE transactions on industrial electronics", Abril 2013, vol. 60, núm. 4, p. 1429-1441.
dc.identifier.issn0278-0046
dc.identifier.urihttp://hdl.handle.net/2117/19703
dc.description.abstractAncillary services for distributed generation (DG)systems become a challenging issue to smartly integrate renewable-energy sources into the grid. Voltage control is one of these ancillary services which can ride through and support the voltage under grid faults. Grid codes fromthe transmission system operators describe the behavior of the energy source, regulating voltage limits and reactive power injection to remain connected and support the grid under fault. On the basis that different kinds of voltage sags require different voltage support strategies, a flexible control scheme for three-phase grid-connected inverters is proposed. In three-phase balanced voltage sags, the inverter should inject reactive power in order to raise the voltage in all phases. In one- or two-phase faults, the main concern of the DG inverter is to equalize voltages by reducing the negative symmetric sequence and clear the phase jump. Due to system limitations, a balance between these two extreme policies is mandatory. Thus, over- and undervoltage can be avoided, and the proposed control scheme prevents disconnection while achieving the desired voltage support service. The main contribution of this work is the introduction of a control algorithm for reference current generation that provides flexible voltage support under grid faults. Two different voltage sags have been experimentally tested to illustrate the behavior of the proposed voltage support control scheme.
dc.format.extent13 p.
dc.language.isoeng
dc.publisherInstitute of Electrical and Electronics Engineers (IEEE)
dc.subjectÀrees temàtiques de la UPC::Enginyeria electrònica
dc.subjectÀrees temàtiques de la UPC::Energies::Energia elèctrica
dc.subject.lcshDistributed generation of electric power.
dc.subject.otherReactive power control
dc.subject.othervoltage ride through
dc.subject.othervoltage sag
dc.subject.othervoltage support
dc.titleFlexible voltage support control for three-phase distributed generation inverters under grid fault
dc.typeArticle
dc.subject.lemacEnergia elèctrica -- Distribució
dc.subject.lemacEnergia elèctrica -- Generació distribuïda
dc.subject.lemacGeneradors
dc.contributor.groupUniversitat Politècnica de Catalunya. SEPIC - Sistemes Electrònics de Potència i de Control
dc.identifier.doi10.1109/TIE.2012.2185016
dc.relation.publisherversionhttp://ieeexplore.ieee.org/xpl/articleDetails.jsp?arnumber=6134653
dc.rights.accessRestricted access - publisher's policy
local.identifier.drac11209111
dc.description.versionPostprint (published version)
dc.date.lift10000-01-01
local.citation.authorCamacho, A.; Castilla, M.; Miret, J.; Vasquez, J.; Alarcon, E.
local.citation.publicationNameIEEE transactions on industrial electronics
local.citation.volume60
local.citation.number4
local.citation.startingPage1429
local.citation.endingPage1441


Fitxers d'aquest items

Imatge en miniatura

Aquest ítem apareix a les col·leccions següents

Mostra el registre d'ítem simple