Surface biofunctionalization by covalent co-immobilization of oligopeptides
Visualitza/Obre
Xi et al..pdf (1,029Mb) (Accés restringit)
Sol·licita una còpia a l'autor
Què és aquest botó?
Aquest botó permet demanar una còpia d'un document restringit a l'autor. Es mostra quan:
- Disposem del correu electrònic de l'autor
- El document té una mida inferior a 20 Mb
- Es tracta d'un document d'accés restringit per decisió de l'autor o d'un document d'accés restringit per política de l'editorial
10.1016/j.colsurfb.2013.02.005
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/19384
Tipus de documentArticle
Data publicació2013-07-01
Condicions d'accésAccés restringit per política de l'editorial
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
Functionalization of implants with multiple bioactivities is desired to obtain surfaces with improved biological and clinical performance. Our objective was developing a simple and reliable method to obtain stable multifunctional coatings incorporating different oligopeptides. We co-immobilized on titanium surface oligopeptides of known cooperative bioactivities with a simple and reliable method. Appropriately designed oligopeptides containing either RGD or PHSRN bioactive sequences were mixed and covalently bonded on CPTES-silanized surfaces. Coatings made of only one of the two investigated peptides and coatings with physisorbed oligopeptides were produced and tested as control groups. We performed thorough characterization of the obtained surfaces after each step of the coating preparation and after mechanically challenging the obtained coatings. Fluorescence labeling of RGD and PHSRN peptides with fluorescence probes of different colors enabled the direct visualization of the co-immobilization of the oligopeptides. We proved that the coatings were mechanically stable. The surfaces with co-immobilized RGD and PHSRN peptides significantly improved osteoblasts response in comparison with control surfaces, which assessed the effectiveness of our coating method to bio-activate the implant surfaces. This same simple method can be used to obtain other multi-functional surfaces by co-immobilizing oligopeptides with different targeted bioactivities –cell recruitment and differentiation, biomineral nucleation, antimicrobial activity– and thus, further improving the clinical performance of titanium implants.
CitacióChen, Xi.; Sevilla, P.; Aparicio, C. Surface biofunctionalization by covalent co-immobilization of oligopeptides. "Colloids and Surfaces B. Biointerfaces", 01 Juliol 2013, vol. 107, p. 189-197.
ISSN0927-7765
Versió de l'editorhttp://www.sciencedirect.com/science/article/pii/S0927776513001148
Col·leccions
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
Xi et al..pdf | 1,029Mb | Accés restringit |