Thixoforging tools materials: determination of appropriate features and experimental evaluation
Visualitza/Obre
Estadístiques de LA Referencia / Recolecta
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/193032
Tipus de documentText en actes de congrés
Data publicació2011
EditorCIMNE
Condicions d'accésAccés obert
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
Whereas thixoforming of low melting point alloys as aluminium or magnesium is
now an industrial reality, thixoforming of high melting point alloys, as steel, is still at the
research level. High working temperature, die wearing and production rate are problems that
must be solved and are under investigation. The aim of this work is to evaluate the thermal
and mechanical loadings applied to the tools during the steel thixoforging process in order to
determine if classical hot-work tool steel could be an appropriate tool material. This
evaluation has been realized thanks to experimental trials and to simulations on the finite
elements code Forge2009©. The effect of the loadings on the tool’s failure modes are
highlighted and compared to the ones observed in classical hot forging. Beyond this, the
failure modes of hot-work tool steel, the X38CrMoV5 or H11, is presented.
ISBN978-84-89925-78-6
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
Coupled-2011-22_Thixoforging tools materials.pdf | 647,2Kb | Visualitza/Obre |