On the fracture models determined by the continuum-strong discontinuity approach
Visualitza/Obre
Cita com:
hdl:2117/192453
Tipus de documentArticle
Data publicació2006-04
EditorSpringer
Condicions d'accésAccés obert
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
The paper focuses on the Continuum Strong Discontinuity Approach (CSDA) to fracture mechanics, and the traction-separation cohesive laws induced from continuum dissipative models as their projections onto the failure interface. They are compared with the cohesive laws commonly used for the fracture simulation in quasi-brittle materials, typically concrete. Emphasis is placed in the analysis of the mechanical stress-strain states induced by the CSDA into the fracture process zone: first when the damage mechanism is initiated and, after, when the cohesive model determines the crack response. The influence of the material parameters, particularly the fracture energy and the initial continuum softening modulus, in the obtained phenomenological responses is also analyzed. Representative numerical solutions of fracture problems are finally presented.
Descripció
The final publication is available at Springer via https://doi.org/10.1007/s10704-005-3065-1
CitacióHuespe, A. [et al.]. On the fracture models determined by the continuum-strong discontinuity approach. "International journal of fracture", Abril 2006, vol. 137, núm. 1-4, p. 211-229.
ISSN0376-9429
Versió de l'editorhttps://link.springer.com/article/10.1007/s10704-005-3065-1
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
FRAC-S-05-00221.fdf.pdf | 406,8Kb | Visualitza/Obre |