Recent Submissions

  • Microstructural and micromechanical characterization of Ti-6Al-4V samples produced by laser cladding 

    Roa Rovira, Joan Josep; Leunda, Josu; Mateo García, Antonio Manuel (2020)
    Conference report
    Open Access
    Additive manufacturing of metals is an innovative technology that stimulates much interest. In the particular case of titanium alloys, this technology is nowadays used to produce components, mainly for the aeronautic ...
  • How can we exploit biomaterials for the benefit of plasma medicine? 

    Canal Barnils, Cristina (2020)
    Conference report
    Open Access
  • Merging cold plasmas and biomaterials for osteosarcoma therapy 

    Canal Barnils, Cristina (2020)
    Conference report
    Open Access
  • Impact behavior of PLA/PCL bioblends 

    León Albiter, Noel; Abt, Tobias Martin; Hortos Llobera, Martí; Espino, Sebastian; Santana Pérez, Orlando Onofre; Maspoch Rulduà, Mª Lluïsa (2020)
    Conference report
    Open Access
    The effect of adding polycaprolactone (PCL) on the impact behavior of poly(lactic acid) (PLA) has been evaluated. Bioblends (with and without compatibilizer) were prepared in a pilot plant (twin screw extrusion, 5kg/h) ...
  • PLA/BIOPA bioblends for FDM: Mechanica and fracture behavior 

    Cailloux, Jonathan; García Masabet, Violeta del Valle; Loaeza Becerril, Alfonso David; Carrasco Alonso, Félix Ángel; Maspoch Rulduà, Mª Lluïsa; Santana Pérez, Orlando Onofre (2020)
    Conference lecture
    Open Access
    The fracture behaviour of PLA/PA bioblends has been investigated in order to extend its processing through fused deposition modeling printing by pellets supply (FDM-p). The viability of the processing technique in creating ...
  • Effect of Manganese during the stabilization of austenite in Quench and Partitioning (Q&P) Steels 

    Carpio Garza, Marcel Francisco; Calvo Muñoz, Jessica; Cabrera Marrero, José M.
    Conference report
    Open Access
    Nowadays, automobile emissions are one of the leading causes of air contamination. In this regard, the weight reduction of the vehicles structures and parts is vital, while the passenger’s safety is the first issue. ...
  • In-situ consolidation of nanocrystalline aluminium by ball milling 

    Solà Saracibar, Joan; Llumà Fuentes, Jordi; Jorba Peiró, Jordi (2011)
    Conference report
    Open Access
    Bulk nanocrystalline aluminium spheres were produced by in situ consolidation of commercially pure aluminium powder by ball milling at room temperature. The effect of four milling variables on the in situ consolidation ...