EBG filtering structure using thick film high dielectric constant resonators
Visualitza/Obre
10.15662/IJAREEIE.2016.0509074
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/190190
Tipus de documentArticle
Data publicació2016
EditorEss & Ess Research Publications
Condicions d'accésAccés obert
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
This paper reports the design of a stop-pass and band-pass filtering EBG structure operating in the Ku
band by using thick film high dielectric constant resonators. The design is based on a microstrip linethat periodically
loaded with a new kind of dielectric resonator fabricated with a commercial high dielectricconstant epoxy paste which
compatible with serigraphy and screen printing technology. The geometry of theresonator has been chosen in such a
way that, the filtering structure appear below the first resonant frequency.An equivalent circuit model of the proposed
structure is discussed and compared with electromagneticsimulations and measurements
CitacióMoradi, B. [et al.]. EBG filtering structure using thick film high dielectric constant resonators. "International journal of advanced research in electrical, electronics and instrumentation engineering", 2016, vol. 5, núm. 9, p. 7644-7650.
ISSN2278-8875
Versió de l'editorhttp://www.ijareeie.com/volume-5-issue-9
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
FInal-Final-IJAREEIE.pdf | 387,7Kb | Visualitza/Obre |