Show simple item record

dc.contributorArencón Osuna, David
dc.contributor.authorYeung, Ka Hin
dc.date.accessioned2020-05-27T08:18:03Z
dc.date.issued2015-06
dc.identifier.urihttp://hdl.handle.net/2117/189156
dc.description.abstract3D printing technology is gaining interest from the society since the last decade. This phenomenon is thanks to the introduction of an open-source, public affordable and self-replicable into the market. However, the strength of parts produced with such equipment are still an unknown variable to be determined. The aim of this study is to determine the influences of printing parameters over the mechan-ical strength of 3D printed parts. For its achievement, specimens with different printing setting are subjected to mechanical strength testing. With the results of this experiment, a mathematical model for strength prediction is developed.
dc.language.isoeng
dc.publisherUniversitat Politècnica de Catalunya
dc.subjectÀrees temàtiques de la UPC::Enginyeria dels materials
dc.subject.lcshThermoplastics--Mechanical properties
dc.subject.lcshThree-dimensional printing
dc.titleStudy of mechanical properties of thermoplastic polymeric parts produced by filament extrusion 3D printing
dc.typeBachelor thesis
dc.subject.lemacTermoplàstics -- Propietats mecàniques
dc.subject.lemacImpressió 3D
dc.identifier.slug205-327
dc.rights.accessRestricted access - author's decision
dc.date.lift10000-01-01
dc.date.updated2019-10-24T08:23:01Z
dc.audience.educationlevelGrau
dc.audience.mediatorEscola Tècnica Superior d'Enginyeries Industrial i Aeronàutica de Terrassa
dc.audience.degreeGRAU EN ENGINYERIA EN VEHICLES AEROESPACIALS (Pla 2010)


Files in this item

Thumbnail
Thumbnail
Thumbnail

This item appears in the following Collection(s)

Show simple item record

All rights reserved. This work is protected by the corresponding intellectual and industrial property rights. Without prejudice to any existing legal exemptions, reproduction, distribution, public communication or transformation of this work are prohibited without permission of the copyright holder