Numerical simulation of wrap scroll temperature for refrigeration and air conditioning compressors
Visualitza/Obre
Numerical Simulation of Wrap Scroll Temperature for Refrigeration and Air_1380.pdf (341,5Kb) (Accés restringit)
Sol·licita una còpia a l'autor
Què és aquest botó?
Aquest botó permet demanar una còpia d'un document restringit a l'autor. Es mostra quan:
- Disposem del correu electrònic de l'autor
- El document té una mida inferior a 20 Mb
- Es tracta d'un document d'accés restringit per decisió de l'autor o d'un document d'accés restringit per política de l'editorial
Estadístiques de LA Referencia / Recolecta
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/18870
Tipus de documentText en actes de congrés
Data publicació2012
Condicions d'accésAccés restringit per política de l'editorial
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
Being part of a model which simulates the whole consecutive overall compression process in a scroll compressor by solving equations of mass, momentum and energy balance for fluid refrigerant (Rovira et al. ,2006), an updated version is presented. In this new model, an energy balance over the scroll wraps is implemented; where temperatures and heat fluxes are obtain
ed dividing the wall into 36 parts (slices) each turn.
The scroll wrap is divided into different solid slices; energy balance is carried out, taking into account: i) conduction along the scroll wrap; ii) convection heat transfer between each slice and each fluid chamber, with special attention
on solid slice - fluid chamber contact at each time step. The numerical model shows the one dimensional and transient temperature, pressure and mass flow rate, at each fluid chamber along the scroll compressor, among detailed solid wrap temperature distribution.
The whole numerical model has been experimentally validated against experimental data from technical literature (Halm,1997)(Chen et al.,2004a)(Chen et al.,2004b), comparing mass flow rate, discharge temperature, compression work and power consumption.
Finally, the influence of wall temperatures and wall heat fluxes on the compressor performance and other output variables is analyzed.
CitacióRovira, J. [et al.]. Numerical simulation of wrap scroll temperature for refrigeration and air conditioning compressors. A: International Compressor Engineering Conference. "2012 Compressor/Refrigeration & Air Conditioning/ High Performance Buildings Conferences at Purdue". Purdue: 2012, p. 1380, 1-1380, 8.
Versió de l'editorhttp://cataleg.upc.edu/record=b1420728~S1*cat
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
Numerical Simul ... igeration and Air_1380.pdf | 341,5Kb | Accés restringit |