Hot deformation activation energy (QHW) of austenitic Fe-22Mn-1.5Al-1.5Si-0.4C TWIP steels microalloyed with Nb, V, and Ti
Visualitza/Obre
Article (1,223Mb) (Accés restringit)
Sol·licita una còpia a l'autor
Què és aquest botó?
Aquest botó permet demanar una còpia d'un document restringit a l'autor. Es mostra quan:
- Disposem del correu electrònic de l'autor
- El document té una mida inferior a 20 Mb
- Es tracta d'un document d'accés restringit per decisió de l'autor o d'un document d'accés restringit per política de l'editorial
Cita com:
hdl:2117/18717
Tipus de documentArticle
Data publicació2013
Condicions d'accésAccés restringit per política de l'editorial
Llevat que s'hi indiqui el contrari, els
continguts d'aquesta obra estan subjectes a la llicència de Creative Commons
:
Reconeixement-NoComercial-SenseObraDerivada 3.0 Espanya
Abstract
The activation energy for hot deformation (
Q
HW
) of high-Mn microalloyed TWIP steels was determined
from experimental uniaxial hot compression curves. The presence of microalloying elements such as
Nb, V, and Ti, increases the
Q
HW
value from 366 in the non-microalloyed one to 446 kJ/mol in the
V-microalloyed TWIP steel. This change represents an increase from 16% up to 22% of
Q
HW
values.
CitacióReyes, F.; Mejía Granados, I.; Cabrera, J. Hot deformation activation energy (QHW) of austenitic Fe-22Mn-1.5Al-1.5Si-0.4C TWIP steels microalloyed with Nb, V, and Ti. "Materials science and engineering A. Structural materials properties microstructure and processing", 2013, vol. 562, p. 46-52.
ISSN0921-5093
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
Hot deformation ... -1 5Al-1 5Si-0 4C TWIP.pdf | Article | 1,223Mb | Accés restringit |