DEM analysis of effect of interfacial transitional zones on fracture in concrete
Visualitza/Obre
Estadístiques de LA Referencia / Recolecta
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/187127
Tipus de documentText en actes de congrés
Data publicació2017
EditorCIMNE
Condicions d'accésAccés obert
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
The aim of this paper is to show 3D numerical results on progressive fracture of the concrete at aggregate level using discrete element method (DEM). The test were performed for three point bending beam. Concrete was modelled as heterogeneous material consisted four phases: aggregate, cement matrix, interfacial transitional zones (ITZs) and air voids. The microstructure of sample as position and shapes of aggregate and air voids were taken directly from laboratory test. The non-destructive method of X-ray microCT scans was used. The numerical results (both macro- and microscopic) were directly compared with own laboratory test and previous 2D calculations. The special attention was lied on the crack geometry evolution. The effect of different properties of ITZ was studied.
ISBN978-84-946909-7-6
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
Particles_2017-21_DEM analysis on effect.pdf | 1,085Mb | Visualitza/Obre |