dc.contributor | García-Almiñana, Daniel |
dc.contributor | Valencia Pellisa, David |
dc.contributor.author | Gómez Blázquez, Guillermo |
dc.contributor.other | Universitat Politècnica de Catalunya. Departament de Projectes d'Enginyeria |
dc.contributor.other | Universitat Politècnica de Catalunya. Departament d'Expressió Gràfica a l'Enginyeria |
dc.coverage.spatial | east=2.0284861; north=41.5494418; name=Carrer de Bosch i Gimpera, 2, 08223 Terrassa, Barcelona, Espanya |
dc.date.accessioned | 2020-05-11T12:37:57Z |
dc.date.issued | 2016-06 |
dc.identifier.uri | http://hdl.handle.net/2117/187041 |
dc.description.abstract | With the title of “Design project of a plastic grab handle” it will perform a grab handle
prototype with the experience of the study of the different grab handle which Nifco has.
That is to say, in other words, the aim of the project is to perform a study of a product
where it is placed inside the vehicle, in the inferior side of the roof. Then, it will design a
prototype of this product with the ideas of the study to improve and innovate respect to
the competition.
A general view about Nifco, Nifco group is a multinational which it is invested in designing,
developing and manufacturing quality components for the global Automotive Industry.
From the interior of a vehicle to the exterior, inclusive of the engine, Nifco has a wealth
of knowledge and expertise in many product areas. Nifco group has different plants
around the world. In our case, Nifco Spain allows us to perform this study and they lend
us the samples and the information necessary to make it and the prototype.
Afterwards, the product to design is manufactured with plastic and it is called “grab
handle”. It is a support which allows to help us when we need to grab us to something
into the car. It is not an indispensable part but it is a product to make easier our
necessities. |
dc.language.iso | eng |
dc.publisher | Universitat Politècnica de Catalunya |
dc.subject | Àrees temàtiques de la UPC::Economia i organització d'empreses::Direcció d'operacions::Anàlisi de processos de negoci i de fabricació |
dc.subject | Àrees temàtiques de la UPC::Enginyeria mecànica::Processos de fabricació mecànica::Màquines i mecanismes |
dc.subject.lcsh | Automobiles -- Equipment and supplies |
dc.subject.lcsh | Prototypes, Engineering |
dc.subject.lcsh | Computer-aided design |
dc.title | Design project of a plastic grab handle |
dc.type | Bachelor thesis |
dc.subject.lemac | Automòbils -- Equip i accessoris |
dc.subject.lemac | Prototips (Enginyeria) |
dc.subject.lemac | Disseny assistit per ordinador |
dc.identifier.slug | 205-603 |
dc.rights.access | Restricted access - author's decision |
dc.date.lift | 10000-01-01 |
dc.date.updated | 2019-10-24T10:19:21Z |
dc.audience.educationlevel | Grau |
dc.audience.mediator | Escola Superior d'Enginyeries Industrial, Aeroespacial i Audiovisual de Terrassa |
dc.audience.degree | GRAU EN ENGINYERIA EN TECNOLOGIES INDUSTRIALS (Pla 2010) |