Micro-mechanical damage in tool steels analyzed by acoustic emission technique
Visualitza/Obre
Picas JAE12.pdf (2,337Mb) (Accés restringit)
Sol·licita una còpia a l'autor
Què és aquest botó?
Aquest botó permet demanar una còpia d'un document restringit a l'autor. Es mostra quan:
- Disposem del correu electrònic de l'autor
- El document té una mida inferior a 20 Mb
- Es tracta d'un document d'accés restringit per decisió de l'autor o d'un document d'accés restringit per política de l'editorial
Estadístiques de LA Referencia / Recolecta
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/18640
Tipus de documentArticle
Data publicació2012-12-30
Condicions d'accésAccés restringit per política de l'editorial
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
The carbides in tool steels act as hard particles and dictate the wear resistance. The origin of failure of these steels is mostly related with the carbide cracking, as a nucleation site of final cracks. This paper shows the acoustic emission (AE) signals related with the nucleation (carbide
cracking) and the crack growth (in the metallic matrix) during a monotonic bending test of a tool steel obtained by ingot metallurgy routes (DIN 1.2379). The paper presents a relationship between
the frequency spectrum of AE signals obtained and the microscopic images during the test.
CitacióPicas, I. [et al.]. Micro-mechanical damage in tool steels analyzed by acoustic emission technique. "Journal of acoustic emission", 30 Desembre 2012, vol. 30, p. 1-8.
ISSN0730-0050
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
Picas JAE12.pdf | 2,337Mb | Accés restringit |