Capítols de llibre

Recent Submissions

  • Diffusional approach on electrospun PLLA membranes for caffeine delivery 

    Serafini Immich, Ana; Tornero García, José Antonio; Cano Casas, Francesc; Lis Arias, Manuel José (Book publisher international, 2021-05-07)
    Part of book or chapter of book
    Restricted access - publisher's policy
    One of the great advantages of electrospun fibers is the large tridimensional area produced, capable of storing any type of material. The aim of our investigation is to study the electrospinning technique to produce polymer ...

  • Reuse of salt-containing dyeing effluents by means of an electrochemical and ultraviolet coupled system 

    Gutiérrez Bouzán, María Carmen; Buscio Olivera, Valentina; Tornero García, José Antonio (Springer, 2021-04-23)
    Part of book or chapter of book
    Restricted access - publisher's policy
    The textile dyeing produces a large volume of wastewater with high salinity and deep colouration. Residual dyes are generally not removed in conventional wastewater treatments and therefore specific treatments are required ...

  • El ingenio (in)visible: Desde las pioneras en ingeniería hasta la actualidad 

    Salán Ballesteros, Maria Núria; Ferrer Balas, Dídac; Amante García, Beatriz; Sureda Anfres, Miquel (OmniaScience, 2019)
    Part of book or chapter of book
    Open Access
    En la actualidad, hombres y mujeres accedemos a la formación en general, y a la universitaria en particular, aparentemente en paridad. Pero no en todos los ámbitos. Las titulaciones del ámbito de la tecnología muestran ...

  • Polymers for bone repair 

    Rey Viñoles, Sergi; Engel López, Elisabeth; Mateos Timoneda, Miguel Ángel (Woodhead Publishing, 2019-01-11)
    Part of book or chapter of book
    Restricted access - publisher's policy
    The substitution of tissues due to tumors, pathologies, or traumatic accidents is well known, and different surgical branches perform these kinds of surgeries on a daily basis with relative ease. The substitution of bone ...

  • An investigation on the effect of pressure and temperature on microcellular foams of Poly(lactic) acid (PLA)/Acrylonitrile-Butadiene-Styrene (ABS) binary blends 

    Kamrani Moghadam, Mohammad Reza; Sánchez Soto, Miguel (Springer, 2020-05-30)
    Part of book or chapter of book
    Restricted access - publisher's policy
    Reducing the weight of petrol-derived plastics is a common way to decrease the environmental impact of several products. Another option consist in using biopolymers instead. However, most of the times, the complete ...

  • Evaluation of the mechanical properties of Poly(Lactic) Acid/ABS Bio-Blend foams 

    Sánchez Soto, Miguel; Kamrani Moghadam, Mohammad Reza; Maspoch Rulduà, Mª Lluïsa; Santana Pérez, Orlando Onofre; Cailloux, Jonathan (Springer, 2020-05-30)
    Part of book or chapter of book
    Restricted access - publisher's policy
    Foaming is a powerful method that allows lightening of products and reducing the amount of material used. Poly(lactic) acid (PLA) is considered a promising thermoplastic for the replacement of traditional non-biodegradable ...

  • Duplex and superduplex stainless steels: Microstructure and property evolution by surface modification processes 

    Biserova Tahchieva, Alisiya; Llorca Isern, Núria; Cabrera Marrero, José M. (2020-04)
    Part of book or chapter of book
    Open Access