Show simple item record

dc.contributor.authorRivera, Julián
dc.contributor.authorBianchetto, Hugo Daniel
dc.contributor.authorMartínez Reguero, Adriana Haydée
dc.contributor.otherUniversitat Politècnica de Catalunya. Departament d'Enginyeria Civil i Ambiental
dc.date.accessioned2020-04-28T15:10:52Z
dc.date.available2020-04-28T15:10:52Z
dc.date.issued2021-01
dc.identifier.citationRivera, J.; Bianchetto, H.; Martinez, A. Method to determine the dosage of bituminous tack coat in function of the texture of milled asphalt layers to be overlaid. "International journal of pavement engineering", 2021, vol. 22, núm. 1, p. 21-31.
dc.identifier.issn1029-8436
dc.identifier.urihttp://hdl.handle.net/2117/185478
dc.descriptionThis is an Accepted Manuscript of an article published by Taylor & Francis Group in International Journal of Pavement Engineering on 2019, available online at: http://www.tandfonline.com/10.1080/10298436.2019.1576875
dc.description.abstractIn the rehabilitation of flexible pavements with asphalt layers, it is necessary to apply a bituminous tack coat with a pre-established dosage, which usually does not take into account the degree of texture generated if a milling operation is previously performed since this increases the surface at the interface. On the other hand, when milling, grooves are obtained that could lead to the runoff of bitumen emulsion with excessive deposition in their valleys due to dosages greater than those needed. This work analyses the above mentioned and achieves a compromise solution, with its corresponding method of application, based on the mechanical behaviour obtained with different degrees of texture and validated for typical materials used in Argentina.
dc.description.sponsorshipThis work was supported by Argentine Ministry of Education [grant number IFI4708TC].
dc.format.extent11 p.
dc.language.isoeng
dc.publisherTaylor & Francis
dc.subjectÀrees temàtiques de la UPC::Enginyeria civil::Infraestructures i modelització dels transports::Transport per carretera
dc.subject.lcshBituminous materials
dc.subject.otherRoad engineering
dc.subject.otherAsphalt overlays
dc.subject.otherPavement milling
dc.subject.otherBituminous tack coat
dc.titleMethod to determine the dosage of bituminous tack coat in function of the texture of milled asphalt layers to be overlaid
dc.typeArticle
dc.subject.lemacMaterials bituminosos
dc.contributor.groupUniversitat Politècnica de Catalunya. MATCAR - Materials de Construcció i Carreteres
dc.identifier.doi10.1080/10298436.2019.1576875
dc.description.peerreviewedPeer Reviewed
dc.relation.publisherversionhttps://www.tandfonline.com/doi/abs/10.1080/10298436.2019.1576875
dc.rights.accessOpen Access
local.identifier.drac24006666
dc.description.versionPostprint (author's final draft)
local.citation.authorRivera, J.; Bianchetto, H.; Martinez, A.
local.citation.publicationNameInternational journal of pavement engineering
local.citation.volume22
local.citation.number1
local.citation.startingPage21
local.citation.endingPage31


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record

All rights reserved. This work is protected by the corresponding intellectual and industrial property rights. Without prejudice to any existing legal exemptions, reproduction, distribution, public communication or transformation of this work are prohibited without permission of the copyright holder