Thermotechnical optimization of membrane clamp profiles regarding statical and assembly engineering aspects
Estadístiques de LA Referencia / Recolecta
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/185429
Tipus de documentText en actes de congrés
Data publicació2013
EditorCIMNE
Condicions d'accésAccés obert
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
The thermal optimization of a two-dimensional membrane model is presented, with regard to typical construction features of a clamp profile. Based on a reference profile, measures of building physics like the use of insulation layers but also geometrical variations of the profile have been investigated in detail to reduce the effect of thermal bridges and heat losses. As a result the inside minimum surface temperature can be raised in order to reduce the risk of water condensation. This helps to avoid possible damages to the supporting structures. The results were used to develop a thermally optimized membrane profile, which meets both assembly engineering and statical requirements. Key features of these profiles are a significant reduction of the thermal transmittance and a complete avoidance of water condensation on the inside surfaces.
ISBN978-84-941686-0-4
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
MEMBRANES_2013- ... timization of membrane.pdf | 1,053Mb | Visualitza/Obre |