Common problems in the design and construction of membrane structures
Visualitza/Obre
Estadístiques de LA Referencia / Recolecta
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/185101
Tipus de documentText en actes de congrés
Data publicació2017
EditorCIMNE
Condicions d'accésAccés obert
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
This paper presents and discusses common problems frequently encountered in the design and construction of membrane structures. Most of these problems can be avoided by careful design and preparation, which would take into account intermediate assembly and erection conditions. The following points should be considered, by assuring that:
Realistic load assumptions are made, if necessary, with supporting load tests
Individual fields are not too large Pre-assembly damage and kinks are avoided
Slippage from snow, if possible, is avoided
When parallel to design, manufacture and assembly, a construction supervisor is tasked with reviewing and supervising all the stages, major damage can be avoided.
ISBN978-84-946909-9-0
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
MEMBRANES_2017- ... problems in the design.pdf | 2,193Mb | Visualitza/Obre |