Recent Submissions

  • Reduction process of Cu/Sn nanocomposite by plasma furnace 

    Rezayat, Mohammad (2022)
    Conference report
    Open Access
    Pre-milled copper and tin powder was subjected to heat treatment to investigate the effect of polyethylene glycol surfactant powder on it. The existing thermographic shows that the delta value of the copper-tin phase powder ...
  • Phase transformation and residual stresses after laser surface modification of metastable austenitic stainless steel 

    Rezayat, Mohammad; Roa Rovira, Joan Josep; Mateo García, Antonio Manuel (2022)
    Conference report
    Open Access
    Laser surface modification treatments have been applied to samples of a metastable austenitic stainless steel AISI 301LN. The amount of residual stresses and the presence of induced a´-martensite phase on the surface and ...
  • Cobalt manganese based coatings via inkjet printing for metallic interconnects in solid oxide cell applications (B0516) 

    Monterde Gascón, María Carmen (2018)
    Conference lecture
    Open Access
    The lowering of the operational temperature of Solid Oxide Cells (SOCs) has made possible the use of ferritic stainless steels (FSS) produced by conventional powder metallurgic (PM). FSS can ensure good electrical conductivity, ...
  • White rice starch: extraction, and chemical and structural characterization 

    Silva, Luan Ramos da; Velasco Perero, José Ignacio; Matta Fakhouri, Farayde (2018)
    Conference lecture
    Restricted access - publisher's policy
    Different kind of starches, such as corn and cassava starch, have been used on the development of biomaterials. Thus, the aim of this research was to extract and characterize the starch from white rice grains, to evaluate ...
  • Nutritional potential of dehydrated residues from rice milk production 

    Silva, Luan Ramos da; Almeida Bachega Casari, Andressa Cecília; Velasco, José Ignacio; Matta Fakhouri, Farayde (Universitat Politècnica de València, 2018)
    Conference lecture
    Open Access
    The aim of this work was to verify the influence of drying on physical and chemical characteristics of residues from rice milk production. Residues were from the production of white, red and black rice. They were dehydrated ...
  • PLA/BIOPA bioblends for FDM: Mechanica and fracture behavior 

    Cailloux, Jonathan; García Masabet, Violeta del Valle; Loaeza Becerril, Alfonso David; Carrasco Alonso, Félix Ángel; Maspoch Rulduà, Mª Lluïsa; Santana Pérez, Orlando Onofre (2020)
    Conference lecture
    Open Access
    The fracture behaviour of PLA/PA bioblends has been investigated in order to extend its processing through fused deposition modeling printing by pellets supply (FDM-p). The viability of the processing technique in creating ...
  • Effect of Manganese during the stabilization of austenite in Quench and Partitioning (Q&P) Steels 

    Carpio Garza, Marcel Francisco; Calvo Muñoz, Jessica; Cabrera Marrero, José M. (2019)
    Conference report
    Open Access
    Nowadays, automobile emissions are one of the leading causes of air contamination. In this regard, the weight reduction of the vehicles structures and parts is vital, while the passenger’s safety is the first issue. ...
  • Fracture mechanics based modelling of failure in advanced high strength steels 

    Jonsén, Par; Frómeta Gutiérrez, David; Casellas Padró, Daniel (2017)
    Conference report
    Open Access
    In the last decade, the favorable properties of the press hardening process for advanced high strength steel (AHSS) have increased the demands concerning passenger safety and lightweight design. AHSS show excellent mechanical ...
  • Determination of the essential work of fracture at high strain rates 

    Frómeta Gutiérrez, David; Casellas Padró, Daniel; Jonsén, Par (2017)
    Conference report
    Open Access
    During the last decades, the use of ultra-high strength steel (UHSS) has increased as its favorable ratio between strength and mass allows the design of lighter body-in-white while maintaining passenger safety. Modeling ...
  • A fracture mechanics approach to develop high crash resistant microstructures by press hardening 

    Casellas Padró, Daniel; Frómeta Gutiérrez, David; Lara, Antoni; Molas Busquets, Sílvia; Jonsén, Par (2017)
    Conference report
    Open Access
    Crashworthiness is a relevant engineering property for car parts. However it is not easy to measure at laboratory scale and complex impact tests have to be carried out to determine it. Crash re-sistance for high strength ...
  • Small-scale assessment of corrosion-induced damage in hardmetals 

    Zheng, Yafeng; Fargas Ribas, Gemma; Besharatloo, Hossein; Roa Rovira, Joan Josep; Lavigne, Olivier; Llanes Pitarch, Luis Miguel (2019)
    Conference report
    Open Access
    In this work, the effect of corrosion-induced damage on the mechanical response of hardmetals was evaluated at small-scale level by means of nanoindentation and nanoscratch. Damage was introduced in a controlled way through ...
  • Biocompatible vehicles for RONS generated by atmospheric plasmas in liquids 

    Canal Barnils, Cristina; Labay, Cédric Pierre; Hamouda, Inés; Tornín, Juan; Ginebra Molins, Maria Pau (Plasmadis, 2019)
    Conference report
    Open Access

View more