Doctorat en Enginyeria Nuclear i de les Radiacions Ionitzants
Collections in this community
-
Articles de revista [22]
Recent Submissions
-
High efficiency and portable monitor of atmospheric radon concentration activity for environmental applications
(European Geosciences Union (EGU), 2021)
Conference lecture
Open Access -
Validation of the MC-GPU Monte Carlo code against the PENELOPE/penEasy code system and benchmarking against experimental conditions for typical radiation qualities and setups in interventional radiology and cardiology
(2021-02-01)
Article
Restricted access - publisher's policyIntroduction: Interventional procedures are associated with potentially high radiation doses to the skin. The 2013/59/EURATOM Directive establishes that the equipment used for interventional radiology must have a device ... -
Comparison of airborne radiation detectors carried by rotary-wing unmanned aerial systems
(2020)
Article
Open AccessThe Universitat Politecnica de Catalunya (UPC), the Physikalisch-Technische Bundesanstalt (PTB) and the German Federal Office of Radiation Protection (BfS) have analysed the response of a 2”x2” (diameter x height) NaI and ... -
Analysis of flow channel insert deformations influence on the liquid metal flow in DCLL blanket channels
(2020-08-01)
Article
Restricted access - publisher's policyThe dual coolant lithium lead (DCLL) is a candidate to be an effective breeding blanket (BB) concept for nuclear fusion technologies. One critical point of this design is the magnetohydrodynamic (MHD) effects involving ... -
Unmanned aircraft based gamma spectrometry system for radiological surveillance
(2020)
Conference lecture
Open AccessIn the framework of the European “Preparedness” project, PTB is developing a spectrometer based dosimetric system that can be operated while being attached to an unmanned aerial vehicle (UAV). Built around 1.5" CeBr3 ... -
Cadmium zinc telluride solid-state detector characterization for its use as a spectro-dosemeter
(2019)
Conference report
Open AccessConcerning ionising radiation monitoring in the environment in areas which, by normal means, are inaccessible, e.g. in contaminated areas after a nuclear or radiological incident, the use of highly mobile systems, comprising ... -
A first prototype of C6D6 total-energy detector with SiPM readout for neutron capture time-of-flight experiments
(2021-01-01)
Article
Open AccessLow efficiency total-energy detectors (TEDs) are one of the main tools for neutron capture cross section measurements utilizing the time-of-flight (TOF) technique. State-of-the-art TEDs are based on a CD liquid-scintillation ... -
Advanced tools for ITER Tritium Plant System Modeling & Design
(2020-01-01)
Article
Open AccessChemical plant system modeling experience based on the use of largely validated commercial modeling tools such as the Aspen HYSYS is adapted and exploited to develop numeric routines for unitary isotopic operations, including ... -
New local optics measurements and correction techniques for the LHC and its luminosity upgrade
(American Physical Society (APS), 2020-04-06)
Article
Open AccessAs the beams at the interaction points (IPs) of circular colliders are pushed toward smaller sizes, the correction of the magnetic field errors in high- ß regions become increasingly important, but also challenging. This ... -
Impact of flux jumps in future colliders
(American Physical Society (APS), 2020-01-02)
Article
Open AccessType-II superconductors, like the Nb3Sn used in the new HL–LHC quadrupole triplet and 11 T dipoles or FCC dipoles, are known to show an unstable behavior during magnetic-field ramps. This paper presents an analysis of the ... -
Metrology for the mobile detection of ionising radiation following a nuclear or radiological incident - “Preparedness”
(De Gruyter Open Sp. z o.o., 2019)
Article
Open Access -
Improving the precision of linear optics measurements based on turn-by-turn beam position monitor data after a pulsed excitation in lepton storage rings
(American Physical Society (APS), 2018-08-04)
Article
Open AccessBeam optics control is of critical importance for machine performance and protection. Nowadays, turn-by-turn (TbT) beam position monitor (BPM) data are increasingly exploited as they allow for fast and simultaneous measurement ...
RSS 1.0