Validation of thermal-mechanical modeling of stainless steel forgings
Visualitza/Obre
Estadístiques de LA Referencia / Recolecta
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/184174
Tipus de documentText en actes de congrés
Data publicació2011
EditorCIMNE
Condicions d'accésAccés obert
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
A constitutive model for recrystallization has been developed within the framework of an existing dislocation-based rate and temperature-dependent plasticity model. The theory has been implemented and tested in a finite element code. Material parameters were fit to data from monotonic compression tests on 304L steel for a wide range of temperatures and strain rates. The model is then validated by using the same parameter set in predictive thermal-mechanical simulations of experiments in which wedge forgings were produced at elevated temperatures. Model predictions of the final yield strengths compare well to the experimental results.
CitacióBrown, A. A. [et al.]. Validation of thermal-mechanical modeling of stainless steel forgings. A: COMPLAS XI. "COMPLAS XI : proceedings of the XI International Conference on Computational Plasticity : fundamentals and applications". CIMNE, 2011, p. 1153-1164.
ISBN978-84-89925-73-1
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
COMPLAS-2011_10 ... of thermal-mechanical.pdf | 569,4Kb | Visualitza/Obre |