Identification of orthotropic plastic material parameters for deep-drawing steel using DIC and FEMU
Estadístiques de LA Referencia / Recolecta
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/183578
Tipus de documentText en actes de congrés
Data publicació2011
EditorCIMNE
Condicions d'accésAccés obert
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
In this paper the deep-drawing sheet steel DC04, representative for sheet-bulk metal forming processes, is characterized through uni- and biaxial tensile and compression tests. The orthotropic plastic material parameters for the Hill 1948 yield surface are identified in two different ways. The first one utilizes uniaxial tensile experiments with specimen in three angles to the rolling direction of the sheet (0, 45 and 90 degree) and the plastic material parameters are calculated through the Lankford coefficients. Second a Finite Element Model Updating (FEMU) procedure is introduced. By taking the measured full-field displacement data and the forces of the biaxial tensile experiments better fitting parameters are identified at reasonable experimental costs.
CitacióSchmaltz, S.; Willner, K. Identification of orthotropic plastic material parameters for deep-drawing steel using DIC and FEMU. A: COMPLAS XI. "COMPLAS XI : proceedings of the XI International Conference on Computational Plasticity : fundamentals and applications". CIMNE, 2011, p. 241-250.
ISBN978-84-89925-73-1
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
COMPLAS-2011_22 ... of orthotropic plastic.pdf | 434,1Kb | Visualitza/Obre |