Quasi-static mechanical behaviour of ti-6al-4v alloy at room temperature
Visualitza/Obre
Estadístiques de LA Referencia / Recolecta
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/182193
Tipus de documentText en actes de congrés
Data publicació2013
EditorCIMNE
Condicions d'accésAccés obert
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
In order to determine the mechanical behavior of a bulk TA6V alloy, a set of mechanical tests such as shear, compression, tensile monotonic tests, and tensile tests on notched samples are performed. The material is tested at constant strain rate. Full-field optical technique for displacement measurements and strain computation are used for all the experiments. Plastic anisotropy and tension–compression asymmetry are observed. The CPB06 [1] yield criterion adapted for hexagonal close packed (hcp) material is identified. The sensitivity of the material parameters on the identification method as well as the efficiency of the model to predict forces and displacement field are discussed. Validation is done by using Finite Element method (FEM) simulations and 3D Digital Image Correlation (3D-DIC) measurements on specimens with multi-axial stress and strain fields subjected to large deformation.
ISBN978-84-941531-5-0
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
COMPLAS2013-03_Quasi-static mechanical.pdf | 1,632Mb | Visualitza/Obre |