Material modelling and parameter identification for sheet-bulk metal forming
Visualitza/Obre
Estadístiques de LA Referencia / Recolecta
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/182184
Tipus de documentText en actes de congrés
Data publicació2013
EditorCIMNE
Condicions d'accésAccés obert
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
In this paper an anisotropic material model at finite strain is implemented and utilised in a commercial Finite Element Software via a User-Subroutine. The material model is based on an additive split of the logarithmic strains to model the anisotropic finite strain behaviour of the material. The material parameters of the non-linear hardening and the orthotropic anisotropy are identified through an inverse Finite Element Model Updating procedure and verified with experimental testing. The chosen material is a sheet steel, which has a low initial yield strength and a high hardening capacity and therewith is typically used in deep-drawing and sheet-bulk metal forming processes.
ISBN978-84-941531-5-0
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
COMPLAS2013-03_Quasi-static mechanical.pdf | 1,632Mb | Visualitza/Obre |