Reset control for DC-DC converters: an experimental application

Power converters in grid connected systems are required to have fast response to ensure the stability of the system. The standard PI controllers used in most power converters are capable of fast response but with significant overshoot. In this paper a hybrid control technique for power converter using a reset PI + CI controller is proposed. The PI + CI controller can overcome the limitation of its linear counterpart (PI) and ensure a fast flat response for power converter. The design, stability and cost of feedback analysis for a DC-DC boost converter employing a PI + CI controller is explored in this work. The simulation and experimental results which confirm the fast, flat response will be presented and discussed.

Description

© 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.

CitationRaveendran, U.; Costa-Castelló, R.; Baños, A. Reset control for DC-DC converters: an experimental application. "IEEE access", 1 Gener 2019, vol. 7, p. 128487-128497.

URIhttp://hdl.handle.net/2117/182043

DOI10.1109/ACCESS.2019.2940140

ISSN2169-3536

Publisher versionhttps://ieeexplore.ieee.org/document/8827519

Collections