Plastic dislocation and incompatibility density as indicators for residual stresses
Estadístiques de LA Referencia / Recolecta
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/181429
Tipus de documentText en actes de congrés
Data publicació2019
EditorCIMNE
Condicions d'accésAccés obert
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
Residual stresses in forming simulations are typically investigated by analyzing the remaining stress state after removing all external loadings. However, the generation of the stress state during forming remains unknown. As a remedy, we use the plastic and elastic dislocation and incompatibility densities - derived from continuum mechanical and differential geometrical considerations - as indicators to track the generation of residual stresses through out a forming operation. Theoretical backgrounds for small and large strain plasticity are highlighted and practical aspects regarding implementation are provided. Two examples demonstrate the functionality of the approach, whereby the plastic incompatibility density in phenomenological, multiplicative large strain plasticity serves as indicator.
ISBN978-84-949194-7-3
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
COMPLAS2019-18_ ... on and incompatibility.pdf | 703,7Kb | Visualitza/Obre |