Mostra el registre d'ítem simple

dc.contributorCarbonell Ventura, Montserrat
dc.contributor.authorBaladron Ledesma, Oscar
dc.contributor.otherUniversitat Politècnica de Catalunya. Departament de Mecànica de Fluids
dc.coverage.spatialeast=1.6208685318771199; north=41.194310875369844; name=Carrer de Coma-rruga, 5, 43881 Cunit, Tarragona, Espanya
dc.date.accessioned2020-03-25T11:20:46Z
dc.date.available2020-03-25T11:20:46Z
dc.date.issued2020-02-05
dc.identifier.urihttp://hdl.handle.net/2117/181296
dc.description.abstract[CATALÀ] El treball consisteix en l’estudi de la millora del sistema de producció d’aigua calenta sanitària i calefacció d’un habitatge unifamiliar per fer-lo més eficient i reduir el seu impacte ambiental. Es poden diferenciar dues grans parts, una primera dedicada a analitzar els sistemes antics instal·lats i calcular i dissenyar una nova proposta basada en la utilització d’energies renovables, i una segona part on es realitza un estudi comparatiu de cost energètic, econòmic i mediambiental entre el sistema antic, el renovable proposat i d’altres opcions que existeixen al mercat. Com a introducció a aquestes dues parts del treball, s’ha realitzat un petit estudi sobre les energies renovables centrant-se sobre tot en l’aerotèrmia. A aquesta primera part d’anàlisi i càlcul on és realitzen, entre d’altres, el càlcul de transmitàncies i de càrregues tèrmiques de l’edifici, s’han utilitzat els procediments descrits per l’ASHRAE i el CTE i a banda s’ha utilitzat el programari CYPECAD amb el que s’ha creat un model en 3D de l’edifici en estudi, que també permet realitzar el càlcul de les càrregues tèrmiques i realitzar simulacions, per exemple, modificant l’aïllament de l’envolupant de l’edifici o modificacions de la instal·lació de calefacció i comprovar l’efecte d’aquestes. Un cop identificades les càrregues tèrmiques de l’edifici, és realitza el càlcul de la demanda de calefacció i ACS segons l’aplicació de l’actual normativa, RITE i CTE, per poder després dimensionar la nova instal·lació proposada i elaborar pressupostos segons les necessitats identificades. A la segona part d’anàlisi comparatiu, es realitza una comparació entre el sistema de producció antic, el nou sistema proposat i diverses opcions alternatives proposades, per verificar si es compleix l’objectiu inicial de millorar l’eficiència i reduir l’impacte ambiental, en quant a emissions de CO2 i d’altra banda comprovar la viabilitat econòmica i temps d’amortització de cada opció tenint en consideració el consum i el cost inicial d’instal·lació.
dc.description.abstract[ANGLÈS] The work consists in studying the improvement of the system of production of hot water and heating of a single-family house to make it more efficient and reduce its environmental impact. Two great parts can be differentiated, one dedicated to analyzing the old systems installed and calculating and designing a new proposal based on the use of renewable energies, and a second part where a comparative study of energy, economic cost and Environmental between the old system, the proposed renewable and other options that exist in the market. As an introduction to these two parts of the work, a small study on renewable energies has been carried out focusing mainly on aerothermics In the first part of analysis and calculation where the transmittance calculations and thermal load of the building are carried out, the procedures described by the ASHRAE and the CTE have been used and, in addition, they have been using the CYPECAD software with which a 3D model of the building under study has been created, which also allows the calculation of thermal loads and simulations, for example, modifying the insulation of the building envelope or modifications of the heating installation and check the effect thereof. Once the thermal load of the building is identified, the calculation of the heating demand and ACS is carried out according to the application of the current regulations, RITE and CTE, in order to then measure the new proposed installation and prepare budgets according to the needs identified. In the second part of comparative analysis, a comparison is made between the old production system, the new proposed system and several alternative options proposed, to verify whether the initial objective is to improve efficiency and reduce the environmental impact , as regards CO2 emissions and on the other hand check the economic viability and amortization time of each option taking into account the consumption and the initial cost of installation.
dc.language.isocat
dc.publisherUniversitat Politècnica de Catalunya
dc.subjectÀrees temàtiques de la UPC::Edificació::Instal·lacions i acondicionament d'edificis::Instal·lacions de climatització
dc.subjectÀrees temàtiques de la UPC::Energies::Recursos energètics renovables
dc.subject.lcshRenewable energy sources
dc.subject.lcshBuildings -- Energy conservation
dc.subject.lcshHeating
dc.subject.otherAerotèrmia
dc.subject.otherCalefacció
dc.subject.otherRenovable
dc.subject.otherEnergia
dc.subject.otherEmissions
dc.subject.otherConsum
dc.subject.otherAïllament
dc.subject.otherNormativa
dc.subject.otherComparació
dc.subject.otherMedi ambient
dc.subject.otherAerothermics
dc.subject.otherRenewable
dc.subject.otherEnergy
dc.subject.otherHeating
dc.subject.otherEmissions
dc.subject.otherConsumption
dc.subject.otherRegulation
dc.subject.otherIsolation
dc.subject.otherComparasion
dc.subject.otherNatural environment
dc.titleEstudi de la viabilitat de substitució d’una caldera de gasoil existent per la producció d’ACS i calefacció per un sistema d’aerotèrmia en un habitatge unifamiliar
dc.typeBachelor thesis
dc.subject.lemacEdificis -- Estalvi d'energia
dc.subject.lemacCalefacció
dc.identifier.slugPRISMA-136657
dc.rights.accessRestricted access - author's decision
dc.date.updated2020-03-23T10:43:35Z
dc.audience.educationlevelGrau
dc.audience.mediatorEscola Politècnica Superior d'Enginyeria de Vilanova i la Geltrú
dc.audience.degreeGRAU EN ENGINYERIA ELECTRÒNICA INDUSTRIAL I AUTOMÀTICA (Pla 2009)


Fitxers d'aquest items

Imatge en miniatura
Imatge en miniatura
Thumbnail

Aquest ítem apareix a les col·leccions següents

Mostra el registre d'ítem simple