A new creep model directly using tabulated test data and implemented in ansys
Visualitza/Obre
Estadístiques de LA Referencia / Recolecta
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/180725
Tipus de documentText en actes de congrés
Data publicació2017
EditorCIMNE
Condicions d'accésAccés obert
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
Nowadays plastics are increasingly used in highly stressed structures in all kinds of constructions. The time dependency, the so-called viscosity, is a crucial part of the material behavior of plastics. A typical form of viscosity is creep. Creep is the increase of deformation under constant load. In the FE-simulation creep behavior is usually described by creep law functions. The commercial software provide many creep law functions depending on time, stress, strain, temperature and multiple material parameters. To run a creep simulation, the user must define all the parameters which requires a certain effort. Curve-fitting procedures might be of help, the results, however, often are not precise enough. For these reasons, we introduce our new creep model doing the similar job as the creep law functions but being able to directly use the tabulated data of the creep tests without curve-fitting procedures. In this paper, we use the model to create a 3D stress-creep strain-time surface based on the tabulated data like isochronous curves, which is represented by bicubically blended Coons patches to provide a good convergence due to their differentiability. This creep model supports strain hardening, which shows more realistic behavior when the load changes significantly during the simulated process
ISBN978-84-946909-6-9
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
COMPLAS2017-30_A new creep model directly.pdf | 1001,Kb | Visualitza/Obre |