Model of discharge lamps with magnetic ballast
View/Open
Model.pdf (1,534Mb) (Restricted access)
Request copy
Què és aquest botó?
Aquest botó permet demanar una còpia d'un document restringit a l'autor. Es mostra quan:
- Disposem del correu electrònic de l'autor
- El document té una mida inferior a 20 Mb
- Es tracta d'un document d'accés restringit per decisió de l'autor o d'un document d'accés restringit per política de l'editorial
Cita com:
hdl:2117/17783
Document typeArticle
Defense date2013-02
Rights accessRestricted access - publisher's policy
Abstract
Magnetic ballast discharge lamp modeling has been extensively studied because these lamps can be an important source of harmonics. Discharge lamp models usually represent the arc voltage by a square waveform. However, this waveform can be far from actual arc voltages, which affects the accuracy of the lamp models. This paper investigates the actual arc voltage behavior of discharge lamps from laboratory measurements and proposes a novel characterization of these voltages to reformulate the conventional models. The accuracy of the new model is validated with experimental measurements.
CitationMolina, J. [et al.]. Model of discharge lamps with magnetic ballast. "Electric power systems research", Febrer 2013, vol. 95, p. 112-120.
ISSN0378-7796
Publisher versionhttp://www.sciencedirect.com/science/article/pii/S0378779612002477
Files | Description | Size | Format | View |
---|---|---|---|---|
Model.pdf![]() | 1,534Mb | Restricted access |
Except where otherwise noted, content on this work
is licensed under a Creative Commons license
:
Attribution-NonCommercial-NoDerivs 3.0 Spain