Study of the design and control of a three-phase multilevel active filter
Visualitza/Obre
TFM_Lumbreras_David.pdf (3,912Mb) (Accés restringit)
Sol·licita una còpia a l'autor
Què és aquest botó?
Aquest botó permet demanar una còpia d'un document restringit a l'autor. Es mostra quan:
- Disposem del correu electrònic de l'autor
- El document té una mida inferior a 20 Mb
- Es tracta d'un document d'accés restringit per decisió de l'autor o d'un document d'accés restringit per política de l'editorial
Estadístiques de LA Referencia / Recolecta
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/177827
Tipus de documentProjecte Final de Màster Oficial
Data2019-10-24
Condicions d'accésAccés restringit per decisió de l'autor
Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i
industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva
reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets
Abstract
This thesis addresses the issues of filtering the harmonics in electrical grids using active power filters. Power converters are the main element of an active power filter. The performance of the filter greatly depends on the type of the converter, on the control system and on the modulation technique used to command the converter. This thesis focuses in three-level neutral point clamped converters which work as shunt active power filters to compensate the current harmonics. Firstly, this thesis makes an introduction about what is the grid quality and why is important to not have currents and voltages with significant harmonics. Secondly, we describe several converter topologies which can work as an active power filter. This description includes the well-known two-level converter and also different topologies of multilevel converters. Thirdly, we present the control system used in the studied converter. The control system includes the grid synchronization, the voltage and current loops and how we detect the current harmonics to compensate. Finally, we present some modulation techniques used in multilevel converters and the modulation used in the proposed active power filter. All the simulations included in this these have been performed using the software MATLAB SIMULINK and PLECS
Descripció
El objetivo consiste en realizar el modelado, simulación y control de un filtro activo trifásico para la compensar la distorsión armónica en las señales de voltaje y de corriente en aplicaciones de energía renovable
MatèriesElectric filters, Active, Electric current converters, Filtres actius, Convertidors de corrent elèctric
TitulacióMÀSTER UNIVERSITARI EN ENGINYERIA DE SISTEMES AUTOMÀTICS I ELECTRÒNICA INDUSTRIAL (Pla 2012)
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
TFM_Lumbreras_David.pdf | 3,912Mb | Accés restringit |