Tunable active inductor-based second-order all-pass filter as a time delay cell for multi-GHz operation
Visualitza/Obre
Cita com:
hdl:2117/176881
Tipus de documentArticle
Data publicació2019-08-15
Condicions d'accésAccés obert
Llevat que s'hi indiqui el contrari, els
continguts d'aquesta obra estan subjectes a la llicència de Creative Commons
:
Reconeixement-NoComercial-SenseObraDerivada 3.0 Espanya
Abstract
In this paper, a CMOS wideband second-order voltage-mode all-pass filter as a time delay cell is proposed. The proposed all-pass filter is made up of solely two transistors as active elements and four passive components. This filter demonstrates a group delay of approximately 60 ps within a bandwidth of 5 GHz, achieving maximum delay–bandwidth product. The proposed circuit is highly linear and has an input-referred 1-dB compression point P1dB of 2 dBm. The power consumption of the proposed circuit is only 10.3 mW. On the other hand, an active inductor is employed in the all-pass filter instead of a passive RLC tank; therefore, the three passive components are eliminated, in order to tune the time delay and improve the size. In this case, even though the power consumption increases, the time delay can be controlled across an improved bandwidth of approximately 10 GHz. Moreover, the circuit demonstrates a 1-dB compression point P1dB of 18 dBm. The proposed all-pass filter is simulated in TSMC 180-nm CMOS process parameters.
CitacióAghazadeh, S. [et al.]. Tunable active inductor-based second-order all-pass filter as a time delay cell for multi-GHz operation. "Circuits systems and signal processing", 15 Agost 2019, vol. 38, núm. 8, p. 3644-3660.
ISSN0278-081X
Versió de l'editorhttps://link.springer.com/article/10.1007/s00034-019-01032-1
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
CSSP-D-18-00261.pdf | 1,347Mb | Visualitza/Obre |