Show simple item record

dc.contributor.authorHabibi, Kian
dc.contributor.authorCastejón Galán, María del Pilar
dc.contributor.authorMartínez Benasat, Antonio
dc.contributor.authorArencón Osuna, David
dc.contributor.otherUniversitat Politècnica de Catalunya. Doctorat en Ciència i Enginyeria dels Materials
dc.contributor.otherUniversitat Politècnica de Catalunya. Departament de Ciència i Enginyeria de Materials
dc.date.accessioned2020-01-13T09:26:26Z
dc.date.available2020-01-13T09:26:26Z
dc.date.issued2018-12
dc.identifier.citationHabibi, K. [et al.]. Effect of filler content, size, aspect ratio and morphology on thermal, morphological and permeability properties of porous talc filled—Polypropylene obtained through MEAUS process. "Advances in Polymer Technology", Desembre 2018, vol. 37, núm. 8, p. 3315-3324.
dc.identifier.issn1098-2329
dc.identifier.urihttp://hdl.handle.net/2117/174672
dc.description.abstractSeveral commercial grades of talc were selected to develop polypropylene based microporous membranes through MEAUS process (melt extrusion—annealing—uniaxial strain). Talc commercial grades differed in particle size, aspect ratio, and crystalline morphology. Different filler percentages were added to polypropylene (1, 5, 10 wt.%) Parameters such as draw ratio during extrusion, annealing temperature strain rate, and strain extension were kept as constant to analyze the effect of the talc characteristics and content of the obtained membranes. Small particle size and high aspect ratio tend to provide membranes with small pore size, high porous area, and high Gurley permeability values
dc.format.extent10 p.
dc.language.isoeng
dc.rightsAttribution 3.0 Spain
dc.rights.urihttp://creativecommons.org/licenses/by/3.0/es/
dc.subjectÀrees temàtiques de la UPC::Enginyeria dels materials
dc.subject.lcshMembranes (Technology)
dc.subject.lcshPolypropylene
dc.subject.lcshSilicate minerals
dc.subject.lcshTalc
dc.subject.otherMembranes
dc.subject.otherPolypropylene
dc.subject.otherTalc morphology
dc.subject.otherTalc size
dc.titleEffect of filler content, size, aspect ratio and morphology on thermal, morphological and permeability properties of porous talc filled—Polypropylene obtained through MEAUS process
dc.typeArticle
dc.subject.lemacMembranes (Tecnologia)
dc.subject.lemacPolipropilè
dc.subject.lemacSilicats
dc.contributor.groupUniversitat Politècnica de Catalunya. POLY2 - Polyfunctional polymeric materials
dc.identifier.doi10.1002/adv.22116
dc.relation.publisherversionhttps://onlinelibrary.wiley.com/doi/full/10.1002/adv.22116
dc.rights.accessOpen Access
local.identifier.drac23332106
dc.description.versionPostprint (published version)
dc.relation.projectidinfo:eu-repo/grantAgreement/MINECO/2PE/MAT2017-89787-P
local.citation.authorHabibi, K.; Castejon, M.; Martinez, A.; Arencon, D.
local.citation.publicationNameAdvances in Polymer Technology
local.citation.volume37
local.citation.number8
local.citation.startingPage3315
local.citation.endingPage3324


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record

Attribution 3.0 Spain
Except where otherwise noted, content on this work is licensed under a Creative Commons license : Attribution 3.0 Spain