Mostra el registre d'ítem simple

dc.contributor.authorValls Vidal, Cristina
dc.contributor.authorGallardo Román, Óscar
dc.contributor.authorVidal Lluciá, Teresa
dc.contributor.authorPastor Blasco, Francisco I. Javier
dc.contributor.authorDíaz Lucea, Pilar
dc.contributor.authorRoncero Vivero, María Blanca
dc.contributor.otherUniversitat Politècnica de Catalunya. Departament d'Enginyeria Tèxtil i Paperera
dc.identifier.citationValls, C. [et al.]. Performance of new and commercial xylanases for ECF and TCF bleaching of eucalyptus kraft pulp. "Wood science and technology", Agost 2011, vol. 45, núm. 3, p. 433-448.
dc.description.abstractSince xylanases can differ widely in their bleaching efficiency, the performance of one new and two commercial xylanases was evaluated in an eucalyptus kraft pulp following XD (X: xylanase; D: chlorine dioxide) and XP (P: hydrogen peroxide) sequences. The new xylanase did not show a significant bleach boosting effect but increased the hexenuronic acid (HexA) removal by 10% after the D stage. The two commercial xylanases behaved in a different way, being one of them (XC) the most effective in increasing delignification (9%) and brightness (3%ISO). Its effectiveness was related to its greater action on releasing the xylan polymer, thus producing also a strong decrease in the HexA contents during the enzymatic stage (15%). All xylanases produced morphological changes in the fibre surfaces, but only with XC cracks and holes that improved the diffusion of reactives were observed. Finally, the best bleaching results were obtained with the XD sequence and therefore, a complete bleaching sequence XDEopD1 (Eop: alkaline extraction with oxygen and peroxide) was carried out with the best enzyme
dc.format.extent16 p.
dc.subjectÀrees temàtiques de la UPC::Enginyeria paperera::Pasta paperera::Fabricació de pastes
dc.subjectÀrees temàtiques de la UPC::Enginyeria paperera::Impacte ambiental
dc.titlePerformance of new and commercial xylanases for ECF and TCF bleaching of eucalyptus kraft pulp
dc.subject.lemacPaper -- Blanqueig
dc.contributor.groupUniversitat Politècnica de Catalunya. CIPAGRAF - Grup de Recerca Paperer i Gràfic
dc.rights.accessRestricted access - publisher's policy
dc.description.versionPostprint (published version)
upcommons.citation.authorValls, C.; Gallardo, Ó.; Vidal, T.; Pastor, F.; Díaz, P.; Roncero, M.
upcommons.citation.publicationNameWood science and technology

Fitxers d'aquest items

Imatge en miniatura

Aquest ítem apareix a les col·leccions següents

Mostra el registre d'ítem simple

Tots els drets reservats. Aquesta obra està protegida pels drets de propietat intel·lectual i industrial corresponents. Sense perjudici de les exempcions legals existents, queda prohibida la seva reproducció, distribució, comunicació pública o transformació sense l'autorització del titular dels drets