Mostra el registre d'ítem simple
The effect of milling parameters on the mechanochemical synthesis of Pd-CeO2 methane oxidation catalysts
dc.contributor.author | Danielis, Maila |
dc.contributor.author | Colussi, Sara |
dc.contributor.author | de Leitenburg, Carla |
dc.contributor.author | Soler Turu, Lluís |
dc.contributor.author | Llorca Piqué, Jordi |
dc.contributor.author | Trovarelli, Alessandro |
dc.contributor.other | Universitat Politècnica de Catalunya. Departament d'Enginyeria Química |
dc.date.accessioned | 2019-12-18T07:34:46Z |
dc.date.available | 2020-09-09T00:27:21Z |
dc.date.issued | 2019-01-01 |
dc.identifier.citation | Danielis, M. [et al.]. The effect of milling parameters on the mechanochemical synthesis of Pd-CeO2 methane oxidation catalysts. "Catalysis science and technology", 1 Gener 2019, vol. 9, núm. 16, p. 4232-4238. |
dc.identifier.issn | 2044-4761 |
dc.identifier.uri | http://hdl.handle.net/2117/174049 |
dc.description.abstract | The preparation of catalytic materials via mechanochemical routes is a very promising alternative to complex wet chemical syntheses due to its simplicity, versatility and ecological advantages. The mechanical mixing of Pd nanoparticles and CeO2 results in very active methane oxidation catalysts; here we explore the effect of milling parameters on the overall performance of Pd–ceria catalysts. The high methane combustion activity is the result of nanoscale interaction between palladium and cerium oxide and it is shown to be strongly dependent on the intensity of milling. This was investigated through methane combustion tests up to 1173 K and characterized by means of temperature programmed oxidation and reduction experiments. The morphological features of the obtained materials were investigated by HRTEM analysis and correlated to the catalytic behavio |
dc.format.extent | 7 p. |
dc.language.iso | eng |
dc.rights | Attribution-NonCommercial-NoDerivs 3.0 Spain |
dc.rights.uri | http://creativecommons.org/licenses/by-nc-nd/3.0/es/ |
dc.subject | Àrees temàtiques de la UPC::Energies |
dc.subject.lcsh | Methane |
dc.subject.lcsh | Materials -- Testing |
dc.title | The effect of milling parameters on the mechanochemical synthesis of Pd-CeO2 methane oxidation catalysts |
dc.type | Article |
dc.subject.lemac | Metà |
dc.subject.lemac | Assaigs de materials |
dc.contributor.group | Universitat Politècnica de Catalunya. NEMEN - Nanoenginyeria de materials aplicats a l'energia |
dc.identifier.doi | 10.1039/c9cy01098j |
dc.description.peerreviewed | Peer Reviewed |
dc.relation.publisherversion | https://pubs.rsc.org/en/content/articlelanding/2019/cy/c9cy01098j#!divAbstract |
dc.rights.access | Open Access |
local.identifier.drac | 25816357 |
dc.description.version | Postprint (author's final draft) |
local.citation.author | Danielis, M.; Colussi, S.; de Leitenburg, C.; Soler, L.; Llorca, J.; Trovarelli, A. |
local.citation.publicationName | Catalysis science and technology |
local.citation.volume | 9 |
local.citation.number | 16 |
local.citation.startingPage | 4232 |
local.citation.endingPage | 4238 |
Fitxers d'aquest items
Aquest ítem apareix a les col·leccions següents
-
Articles de revista [244]
-
Articles de revista [2.226]