Show simple item record

dc.contributor.authorSoler Llorens, Juan Luis
dc.contributor.authorGaliana Merino, Juan José
dc.contributor.authorGiner Caturla, José Juan
dc.contributor.authorRosa Cintas, Sergio
dc.contributor.authorBenabdeloued, Boualem Youcef Nassim
dc.contributor.otherUniversitat Politècnica de Catalunya. Departament de Mecànica de Fluids
dc.date.accessioned2019-12-02T10:08:06Z
dc.date.available2019-12-02T10:08:06Z
dc.date.issued2019-09-21
dc.identifier.citationSoler, J. [et al.]. Geophonino-W: a wireless multichannel seismic noise recorder system for array measurements. "Sensors", 21 Setembre 2019, vol. 19, núm. 19, p. 1:4087-26:4087.
dc.identifier.issn1424-8220
dc.identifier.urihttp://hdl.handle.net/2117/173374
dc.description.abstractThe characterization of soil is essential for the evaluation of seismic hazard, because soil properties strongly influence the damage caused by earthquakes. Methods based on seismic noise are the most commonly used in soil characterization. Concretely, methods based on seismic noise array measurements allow for the estimation of Rayleigh wave dispersion curves and, subsequently, shear-wave velocity profiles. The equipment required for the application of this technique is usually very expensive, which could be a significant economic challenge for small research groups. In this work, we have developed a wireless multichannel seismic noise recorder system (Geophonino-W), which is suitable for array measurements. Each station includes a microcontroller board (Arduino), a conditioning circuit, an Xbee module, an SD card, and a GPS module. Several laboratory tests were carried out in order to study the performance of the Geophonino-W: A frequency response test (impulse response and noise); synchronization test; and battery duration test. Comparisons of Geophonino-W with the commercial systems and field measurements were also carried out. The estimated dispersion curves obtained using the proposed system were compared with the ones obtained using other commercial equipment, demonstrating the effectiveness of Geophonino-W for seismic noise array measurements. Geophonino-W is an economic open-source and hardware system that is available to any small research group or university.
dc.language.isoeng
dc.publisherMultidisciplinary Digital Publishing Institute (MDPI)
dc.rightsAttribution-NonCommercial-NoDerivs 3.0 Spain
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/3.0/es/
dc.subjectÀrees temàtiques de la UPC::Enginyeria mecànica::Mecànica de fluids
dc.subject.lcshEarthquake engineering
dc.subject.otherSeismic data acquisition
dc.subject.otherSeismic noise measurement
dc.subject.otherArduino Due
dc.subject.otherAmbient-noise recorder
dc.subject.otherCustomized hardware
dc.subject.otherSeismic signal conditioning circuit
dc.titleGeophonino-W: a wireless multichannel seismic noise recorder system for array measurements
dc.typeArticle
dc.subject.lemacEnginyeria sísmica
dc.identifier.doi10.3390/s19194087
dc.description.peerreviewedPeer Reviewed
dc.relation.publisherversionhttps://www.mdpi.com/1424-8220/19/19/4087
dc.rights.accessOpen Access
local.identifier.drac25855681
dc.description.versionPostprint (published version)
local.citation.authorSoler, J.; Galiana, J.; Giner, J.; Rosa, S.; Benabdeloued, B.
local.citation.publicationNameSensors
local.citation.volume19
local.citation.number19
local.citation.startingPage1:4087
local.citation.endingPage26:4087


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record

Attribution-NonCommercial-NoDerivs 3.0 Spain
Except where otherwise noted, content on this work is licensed under a Creative Commons license : Attribution-NonCommercial-NoDerivs 3.0 Spain