Neutral-point voltage dynamic model of three-level NPC inverter for reactive load
Tipus de documentText en actes de congrés
Condicions d'accésAccés restringit per política de l'editorial
A three-level neutral-point-c1amped inverter needs a controller for the neutral-point voltage. Typically, the controller design is based on a dynamic model. The dynamic model of the neutral-point voltage depends on the pulse width modulation technique used for the inverter. A pulse width modulation strategy which allows modeling the neutral-point voltage as a first-order continuous function is proposed in this paper. The new model shows that the neutral-point current is proportional to the reactive power drawn from the inverter. Since the model is a first-order model, a simple proportional controller is used in this paper to control the neutral-point voltage. Experimental results verifying the proposed modulation strategy and the controller are also presented in this paper.
CitacióMaheshwari, R.; Munk-Nielsen, S.; Busquets-Monge, S. Neutral-point voltage dynamic model of three-level NPC inverter for reactive load. A: Annual Conference of the IEEE Industrial Electronics Society. "Proceedings 38th Annual Conference of the Industrial Electronics Society". Montreal: 2012, p. 585-589.
|drac neural.pdf||1.162Mb||Accés restringit|