Mostra el registre d'ítem simple

dc.contributorGuardo Zabaleta, Alfredo de Jesús
dc.contributor.authorCastrillo Jiménez, Luis Alberto
dc.contributor.otherUniversitat Politècnica de Catalunya. Departament de Mecànica de Fluids
dc.date.accessioned2019-11-07T15:39:47Z
dc.date.available2019-11-07T15:39:47Z
dc.date.issued2018-10-05
dc.identifier.urihttp://hdl.handle.net/2117/171934
dc.description.abstractThe incorporation of an in-wheel motor system to the powertrain of a Formula Student car requires an important previous study for its posterior application. Despite the great advantages that it offers at a dynamical level, the fact of keeping the whole powertrain system at an optimal temperature range is a challenge tackled in this project, being the principal objective to define an adequate liquid cooling system. This is composed by the inverter’s heat exchanger – the electronic device which dissipates more heat inside the vehicle -, another heat exchanger for the motor – called cooling block -, a radiator capable of evacuating all this energy and a water pump capable of providing the needed mass flow rate to the system. In order to do that, it is carried out an analytical study, a numerical and an experimental one. Furthermore, it is proposed 3D printed nylon as the principal material for the motor cooling block, aiming to facilitate the manufacturing process and to dramatically reduce its weight. However, it is concluded that the designed system is unviable for that application due to the high temperatures reached in the motor due to the low thermal conductivity of the nylon.
dc.language.isoeng
dc.publisherUniversitat Politècnica de Catalunya
dc.rightsAttribution-NonCommercial-NoDerivs 3.0 Spain
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/3.0/es/
dc.subjectÀrees temàtiques de la UPC::Enginyeria mecànica
dc.subject.lcshAutomobiles, Racing -- Motors
dc.subject.lcshElectric motors
dc.subject.lcshHeat exchangers
dc.subject.lcshThree-dimensional printing
dc.subject.lcshCooling systems
dc.subject.lcshNylon
dc.subject.otherCooling system
dc.subject.otherFormula Student
dc.subject.otherIn-wheel electric motor
dc.subject.otherCFD
dc.subject.otherRadiator testing
dc.titleDesign of a cooling system of an electric Formula Student car
dc.typeBachelor thesis
dc.subject.lemacAutomòbils de competició -- Motors
dc.subject.lemacMotors elèctrics
dc.subject.lemacBescanviadors de calor
dc.subject.lemacImpressió 3D
dc.subject.lemacRefrigeració, Sistemes de
dc.subject.lemacNiló
dc.identifier.slugPRISMA-133499
dc.rights.accessOpen Access
dc.date.updated2019-05-30T07:49:03Z
dc.audience.educationlevelGrau
dc.audience.mediatorEscola d'Enginyeria de Barcelona Est
dc.audience.degreeGRAU EN ENGINYERIA MECÀNICA (Pla 2009)


Fitxers d'aquest items

Thumbnail

Aquest ítem apareix a les col·leccions següents

Mostra el registre d'ítem simple