The origin of microstructure inhomogeneity in Mg-3Al-1Zn processed by severe plastic deformation
Visualitza/Obre
origin.pdf (1,661Mb) (Accés restringit)
Sol·licita una còpia a l'autor
Què és aquest botó?
Aquest botó permet demanar una còpia d'un document restringit a l'autor. Es mostra quan:
- Disposem del correu electrònic de l'autor
- El document té una mida inferior a 20 Mb
- Es tracta d'un document d'accés restringit per decisió de l'autor o d'un document d'accés restringit per política de l'editorial
Cita com:
hdl:2117/16664
Tipus de documentArticle
Data publicació2012-08-15
Condicions d'accésAccés restringit per política de l'editorial
Llevat que s'hi indiqui el contrari, els
continguts d'aquesta obra estan subjectes a la llicència de Creative Commons
:
Reconeixement-NoComercial-SenseObraDerivada 3.0 Espanya
Abstract
A Mg–3Al–1Zn alloy has been severely deformed by accumulative back extrusion to investigate the effects of processing parameters (temperature and deformation pass) on the microstructure homogeneity. The results indicate that the activation of different grain refinement mechanisms in magnesium may result in an inhomogeneous microstructure, i.e. a bimodal grain size distribution. However, a rapid rate of homogeneity development has been occurred through applying further subsequent passes. This has been justified considering the imposed strain reversal during accumulative back extrusion processing.
CitacióFatemi, M. [et al.]. The origin of microstructure inhomogeneity in Mg-3Al-1Zn processed by severe plastic deformation. "Materials science and engineering A. Structural materials properties microstructure and processing", 15 Agost 2012, vol. 551, p. 128-132.
ISSN0921-5093
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
origin.pdf | 1,661Mb | Accés restringit |