Show simple item record

dc.contributor.authorFillat Latorre, Úrsula
dc.contributor.authorRoncero Vivero, María Blanca
dc.contributor.authorSacón, Vera Maria
dc.contributor.authorBassa, Alexandre
dc.contributor.otherUniversitat Politècnica de Catalunya. Departament d'Enginyeria Tèxtil i Paperera
dc.date.accessioned2012-09-05T10:13:41Z
dc.date.created2012
dc.date.issued2012
dc.identifier.citationFillat, Ú. [et al.]. Integrating a xylanase treatment into an industrial-type sequence for eucalyptus kraft pulp bleaching. "Industrial & engineering chemistry research", 2012, vol. 51, núm. 7, p. 2830-2837.
dc.identifier.issn0888-5885
dc.identifier.urihttp://hdl.handle.net/2117/16433
dc.description.abstractThe influence of a treatment with two commercial xylanases on pulp and effluents obtained after the bleaching stages in the OXAZDP (O, oxygen stage; X, xylanase treatment; A, acid stage; Z, ozone stage; D, chlorine dioxide stage; P, hydrogen peroxide stage) sequence was studied. Also, the potential saving in chlorine dioxide was assessed. The enzyme treatment was performed on pulp containing some black liquor since the operating conditions were close to the conditions used in the storage tower in Fibria, identified as the most suitable point for application. The greatest differences in kappa number and hexenuronic acid content were observed after the X stage. Whereas, in brightness were observed after the Z stage. The effluent properties from the X stage were higher with the enzyme treatments. Also, the enzymes allowed chlorine dioxide consumption in the bleaching stage to be reduced. The control pulp contained twice as much adsorbable organic halides (AOX) and exhibited twice more brightness reversion than did the enzyme-treated samples. However, the tensile index and drainability at an identical degree of refining were lower in the enzyme-treated samples
dc.format.extent8 p.
dc.language.isoeng
dc.publisherAmerican Chemical Society (ACS)
dc.subjectÀrees temàtiques de la UPC::Enginyeria paperera::Pasta paperera::Blanqueig de pastes
dc.subjectÀrees temàtiques de la UPC::Enginyeria paperera::Pasta paperera
dc.subject.lcshPulping
dc.subject.lcshPulping -- Environmental aspects
dc.titleIntegrating a xylanase treatment into an industrial-type sequence for eucalyptus kraft pulp bleaching
dc.typeArticle
dc.subject.lemacPaper -- Blanqueig
dc.subject.lemacPaper -- Fabricació -- Residus
dc.contributor.groupUniversitat Politècnica de Catalunya. CIPAGRAF - Grup de Recerca Paperer i Gràfic
dc.identifier.doi10.1021/ie202863d
dc.relation.publisherversionhttp://pubs.acs.org/doi/pdfplus/10.1021/ie202863d
dc.rights.accessRestricted access - publisher's policy
local.identifier.drac9953707
dc.description.versionPostprint (published version)
dc.date.lift10000-01-01
local.citation.authorFillat, Ú.; Roncero, M. B.; Sacón, V.; Bassa, A.
local.citation.publicationNameIndustrial & engineering chemistry research
local.citation.volume51
local.citation.number7
local.citation.startingPage2830
local.citation.endingPage2837


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record

All rights reserved. This work is protected by the corresponding intellectual and industrial property rights. Without prejudice to any existing legal exemptions, reproduction, distribution, public communication or transformation of this work are prohibited without permission of the copyright holder