Electrical model simulation for a UHF RFID system in near and far fields
Visualitza/Obre
Estadístiques de LA Referencia / Recolecta
Inclou dades d'ús des de 2022
Cita com:
hdl:2117/15908
Tipus de documentArticle
Data publicació2012
Condicions d'accésAccés obert
Llevat que s'hi indiqui el contrari, els
continguts d'aquesta obra estan subjectes a la llicència de Creative Commons
:
Reconeixement-NoComercial-SenseObraDerivada 3.0 Espanya
Abstract
Radio Frequency IDentification (RFID) deployment is needed for efficient item identification. A simulation environment
in HP-ADS (Advanced Design System of Agilent Technologies) of Ultra High Frequency RFID systems is constructed in this paper.
This paper simulates the system through an electrical model. The tag is represented by a simple empirical model representing the
antenna and the chip. The chip is modeled by its impedance which varies with the code. The tag’s model is suitable for near and far
field applications. A wireless channel with path loss and variable distance factors establishes the reader-tag link. The reader has a
mono-static architecture. Performance of the whole system can be evaluated by changing the operating distance. Modeling
improvement can be obtained by modifying the parameters of the building blocks. Finally, some simulation results are also
included in this paper where data recovery is achieved.
CitacióAbouchakra, S.; Farrukh, U.; Amante, B. Electrical model simulation for a UHF RFID system in near and far fields. "International journal of simulation : systems, science and technology", 2012, vol. 11, núm. 1, p. 14-20.
ISSN1473-8031
Versió de l'editorhttp://ijssst.info/Vol-11/No-1/paper3.pdf
Fitxers | Descripció | Mida | Format | Visualitza |
---|---|---|---|---|
Chakra.pdf | ARTICLE | 239,9Kb | Visualitza/Obre |