Show simple item record

dc.contributor.authorGonzález Jiménez, José Luis
dc.contributor.authorSolar, H.
dc.contributor.authorAdin, Iñigo
dc.contributor.authorMateo Peña, Diego
dc.contributor.authorBerenguer, Roc
dc.contributor.otherUniversitat Politècnica de Catalunya. Departament d'Enginyeria Electrònica
dc.date.accessioned2011-12-29T18:02:59Z
dc.date.available2011-12-29T18:02:59Z
dc.date.created2011-09
dc.date.issued2011-09
dc.identifier.citationGonzález, J. [et al.]. A 16-kV HBM RF ESD Protection Codesign for a 1-mW CMOS Direct Conversion Receiver Operating in the 2.4-GHz ISM Band. "IEEE transactions on microwave theory and techniques", Setembre 2011, vol. 59, núm. 9, p. 2318-2330.
dc.identifier.issn0018-9480
dc.identifier.urihttp://hdl.handle.net/2117/14366
dc.description.abstractA decreasing-sized π -model electrostatic discharge (ESD) protection structure is presented and applied to protect against ESD stresses at the RF input pad of an ultra-low power CMOS front-end operating in the 2.4-GHz industrial-scientific-medical band. The proposed ESD protection structure is composed of a pair of ESD devices located near the RF pad, another pair close to the core circuit, and a high-quality integrated inductor connecting these two pairs. This structure can sustain a human body-model ESD level higher than 16 kV and a machine-model ESD level higher than 1 kV without degrading the RF performance of the front-end. A combined on-wafer transmission line pulse and RF test methodology for RF circuits is also presented confirming previous results. The front-end implements a zero-IF receiver. It has been implemented in a standard 2P6M 0.18-μm CMOS process. It exhibits a voltage gain of 24 dB and a single-sideband noise figure of 8.4 dB, which make it suitable for most of the 2.4-GHz wireless short-range communication transceivers. The power consumption is only 1.06 mW from a 1.2-V voltage supply.
dc.format.extent13 p.
dc.language.isoeng
dc.subjectÀrees temàtiques de la UPC::Enginyeria electrònica::Components electrònics::Transistors
dc.subjectÀrees temàtiques de la UPC::Enginyeria de la telecomunicació::Radiocomunicació i exploració electromagnètica::Radiodifusió per ràdio
dc.subject.lcshRadio
dc.titleA 16-kV HBM RF ESD Protection Codesign for a 1-mW CMOS Direct Conversion Receiver Operating in the 2.4-GHz ISM Band
dc.typeArticle
dc.subject.lemacEqualitzadors
dc.subject.lemacRadiodifusió
dc.contributor.groupUniversitat Politècnica de Catalunya. HIPICS - Grup de Circuits i Sistemes Integrats d'Altes Prestacions
dc.identifier.doi10.1109/TMTT.2011.2160078
dc.description.peerreviewedPeer Reviewed
dc.relation.publisherversionhttp://ieeexplore.ieee.org/stamp/stamp.jsp?arnumber=05953539
dc.rights.accessRestricted access - publisher's policy
drac.iddocument6003852
dc.description.versionPostprint (published version)
upcommons.citation.authorGonzález, J.; Solar, H.; Adin, I.; Mateo, D.; Berenguer, R.
upcommons.citation.publishedtrue
upcommons.citation.publicationNameIEEE transactions on microwave theory and techniques
upcommons.citation.volume59
upcommons.citation.number9
upcommons.citation.startingPage2318
upcommons.citation.endingPage2330


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record

All rights reserved. This work is protected by the corresponding intellectual and industrial property rights. Without prejudice to any existing legal exemptions, reproduction, distribution, public communication or transformation of this work are prohibited without permission of the copyright holder